Ask Experts Questions for FREE Help !
Ask
    wisesage's Avatar
    wisesage Posts: 16, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2007, 05:13 AM
    memory upgrade
    Hello
    My attempt to upgrade from 2 x 128mb sdram pc100... using 2 x 256mb sdram pc133hhz resulted in, apart from 'no signal' a blank monitor sceen.
    Pc make unknown

    Motherboard... MS6183 N1966

    Any help appreciated

    W'sage
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 12, 2007, 06:32 AM
    Turn off power, remove, reinstall/reseat first.
    wisesage's Avatar
    wisesage Posts: 16, Reputation: 1
    New Member
    		  
    #3

    Aug 13, 2007, 12:39 PM
    Quote Originally Posted by Stratmando
    Turn off power, remove, reinstall/reseat first.
    Nope... tried the remedy but still no boot up. Pc runs fine with original memory reinstalled.

    Wise'e
    retsoksirhc's Avatar
    retsoksirhc Posts: 912, Reputation: 71
    Senior Member
    		  
    #4

    Aug 13, 2007, 12:59 PM
    Quote Originally Posted by wisesage
    Hello
    My attempt to upgrade from 2 x 128mb sdram pc100... using 2 x 256mb sdram pc133hhz resulted in, apart from 'no signal' a blank monitor sceen.
    Pc make unknown

    Motherboard ... MS6183 N1966

    Any help appreciated

    W'sage
    According to this manual:
    http://www.fujitsu-siemens.co.uk/rl/...3/MS6183UK.PDF

    Your motherboard only supports PC100 SDRAM. Check section 2.3.1.
    wisesage's Avatar
    wisesage Posts: 16, Reputation: 1
    New Member
    		  
    #5

    Aug 14, 2007, 02:05 AM
    Quote Originally Posted by retsoksirhc
    According to this manual:
    http://www.fujitsu-siemens.co.uk/rl/...3/MS6183UK.PDF

    Your motherboard only supports PC100 SDRAM. Check section 2.3.1.
    Thanks Chris for prompt reply... bad news but appreciated anyway.
    W'sage
    wisesage's Avatar
    wisesage Posts: 16, Reputation: 1
    New Member
    		  
    #6

    Aug 14, 2007, 02:10 AM
    Quote Originally Posted by Stratmando
    Turn off power, remove, reinstall/reseat first.
    Thanks for your interest Stratmando , guess it was worth a try...

    W'sage
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #7

    Aug 14, 2007, 05:30 AM
    Good eye from Retso. I believe, doing the easiest, cheapest, fastest first.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Memory Upgrade [ 5 Answers ]

I have just upgraded the memory (128 EDO) in my Dell Latitude CPi D300 to bring it to 192MB. My BIOS states that I have 192, but my system shows 128. What causes this. :confused:

Possible upgrade ? [ 1 Answers ]

I have a IBM Intellistation E Pro with Pentium III 128mb Ram 20 Gb Hard Drive running Windows 98SE. 933 Processor. I would like to upgrade to Windows Home Edition and would like to know if this machine as is will handle it without having 256 mb Ram. I have no interest in Burning anything and...

Upgrade to xp [ 3 Answers ]

Quick question.If I do and upgrade of windows me with windows home edition will I keep the data I have on that drive.Thanks in advance.

Upgrade [ 1 Answers ]

What should I buy to make my honda civic go fast but not spending too much ?

Upgrade 8.6 to 9 [ 1 Answers ]

Hi, I have a Power PC, Power Macintosh 9600/233 it is running OS 8.6. I would like to install either OS 9 or X. I have both CDs bun niether work >:(. How can I install them? Thank you :)

View more questions Search