Ask Experts Questions for FREE Help !
Ask
    faves's Avatar
    faves Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 15, 2008, 03:52 PM
    Tank height vs pressure
    If I have a water tank(not pressurized)how high would it have to be to get 20# of pressure
    caibuadday's Avatar
    caibuadday Posts: 460, Reputation: 10
    Full Member
     
    #2

    Mar 16, 2008, 01:07 PM
    Quote Originally Posted by faves
    If I have a water tank(not pressurized)how high would it have to be to get 20# of pressure
    For every lb you required 2.31 ft H

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water tank height versus water pressure [ 3 Answers ]

I'm not a physicist so I need your help. I live in Mexico. We have a water tank sitting on the roof - there is no pressure pump. The water pressure in the house is very low. Is there a rule of thumb (for the common man) that will tell me how how much pressure increase will result from raising...

Bigger pressure tank or increase pressure? [ 5 Answers ]

I bought a new home and the builder had installed a 20 gal pressure tank. I have a jet pump system where the motor sits directly on the tank itself. I really notice the pump running a bit,but also notice the loss of pressure quickly, especially in the shower. Now I was thinking of buying a much...

Water pressure against tank height and tank water capacity [ 5 Answers ]

Normally the head pressure of water is .433 pounds per foot of head. Is there any change in pressure by changing the tank water capacity. e.g. if two tanks of 50ft height having water capacity of one is 10,000 gallons and other one has 20,000 gallons. What will be the water pressure difference...

Height of WATER TANK for Plot [ 1 Answers ]

I have a plot of Land 25 acres. I want to build a WATER TANK for distribution of water all around the plot. Can anyone suggest the HEIGHT at which the tower tank is to be made for distribution with good pressure. I do not want to instal a PRESSURE PUMP.

Tank Pressure vs Pump Cut Out Pressure for Well [ 1 Answers ]

I am trying to increase my water system pressure to the minimum required 40 PSI to feed my reverse osmosis drinking water filter. However, the 33 gallon pressure tank for my well pump system says it is pre-charged at 30 PSI and that the cut in pressure for my pump should be set equal to that 30...


View more questions Search