 |
|
|
 |
Junior Member
|
|
Jan 7, 2007, 01:30 AM
|
|
3ph motor
I'm having only a single phase supply. How can I run my 3phase motor without using
A phase converter?
|
|
 |
Uber Member
|
|
Jan 7, 2007, 05:20 AM
|
|
You can't.
|
|
 |
Expert
|
|
Jan 7, 2007, 06:47 AM
|
|
As noted it is not possible. You could change out the motor with a new motor that is single phase
|
|
 |
Junior Member
|
|
Jan 7, 2007, 10:04 PM
|
|
One of my colleague advise to connect a capacitor. Motor terminal R. S to be connected direct to the single phase line and motor terminal T will be connected in series with a capacitor connected to any one of the two hot line. The size of the capacitor will be twice the winding reactance of the motor to create a different phase angle displacement.
I have not tried, but does this work?
Thanks. Happy new year.
|
|
 |
New Member
|
|
Jan 9, 2007, 04:46 PM
|
|
This might make the motor jump or spin for a second as it creates a pseudo 2 phase solution. However, it's more likely the cap will explode.
What your friend is suggesting is similar to how a "starting capacitor" works on a split phase motor. However, such caps can't sustain the prolonged current draw, and besides you need 3 phases for a 3 phase motor. Think of a motor as a rotating electromagnet. The rise and fall of each phase pushes and pulls the motor in a given direction. You need all three phases working in harmony to achieve your goal.
If you can't get you hands on an inverter, try looking for a motor controller that converts single phase power to a 3 phase output. It's basically the same thing.
|
|
 |
Junior Member
|
|
Apr 12, 2007, 08:09 AM
|
|
 Originally Posted by rdot
This might make the motor jump or spin for a second as it creates a pseudo 2 phase solution. However, it's more likely the cap will explode.
What your friend is suggesting is similar to how a "starting capacitor" works on a split phase motor. However, such caps can't sustain the prolonged current draw, and besides you need 3 phases for a 3 phase motor. Think of a motor as a rotating electromagnet. The rise and fall of each phase pushes and pulls the motor in a given direction. You need all three phases working in harmony to achieve your goal.
If you can't get you hands on an inverter, try looking for a motor controller that converts single phase power to a 3 phase output. It's basically the same thing.
The motor controller is the way to go.
I would also go to a motor repair facility and see if you could trade
Your single phase for a 3-phase...
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Motor wiring?
[ 4 Answers ]
:mad: Perhaps someone here can help me, I bought a small GE 120v electric motor for a replacement for a machine. It has 3 three wires (red, yellow,blue) and requires a 10mf capacitor. My best guess was to wire it with Blue to line , red-line & cap, and yellow on the other cap term. But it runs very...
GE motor
[ 1 Answers ]
I have a GE motor that I believe is from an old washer. It has 5 wires. Black to white is 0 ohms, red to white or red to black is 3.9 ohms, yellow to blue is 2.0 ohms. There appears to be "no" centrifugal switch, so I don't think it's a capacitor start but with all the wires I think it might be a...
AC Motor
[ 1 Answers ]
How Do You Rewire a AC Motor that is used on Conveyors?
Squeaky AC motor
[ 1 Answers ]
A chirping noise is coming from my AC unit. I think it is coming from the fan motor. The squeaky chirping noise (sounds like a cricket) kind on cycles so that during a cooling cycle, the fan will go from making no unusual noise to this squeaky chirping noise and then back to no noise again. Do you...
My motor is shaking
[ 2 Answers ]
I just took my 91 honda civic for a 5 hour ride yesterday in the pouring rain. About half way in the trip my car started losing speed so I got on the side of the road and turned it off. After 10 minutes of letting it cool off I drove it the rest of the way. Sometimes it would lose speed/other times...
View more questions
Search
|