Ask Experts Questions for FREE Help !
Ask
    mdshwaib's Avatar
    mdshwaib Posts: 13, Reputation: 0
    New Member
    		  
    #1

    May 20, 2008, 11:12 PM
    VAV system in Airconditioners
    Can anyone tell me what's the logic of VAV - zoning system & operation?
    Eng21's Avatar
    Eng21 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    May 26, 2008, 03:41 AM
    VAV ( variable air volume) system is to control the rooms a/c by varying the air flow to the served area by means of a vav terminal boxes. The air andling unit shall be vav as well.
    The main function of a vav system is to provide individul control over each zone served by a vav terminal box though they are served by only one air handling unit. The main application for it is in office areas for example where each office needs to control the a/c (air flow) individually with minimum effect to the other zones.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Transferring Brinks Alarm System to Non-Monitored System [ 5 Answers ]

I understand that when you cancel your Brinks-monitored security system that they come and remove their equipment (which you apparently don't own) or you can buy all their equipment for $500. The equipment removal exposes unpainted walls and previously-covered holes. Is it possible to install a...

Smoke extract system & staircase press. System [ 2 Answers ]

I am working for a 35 storey tower. There are smoke extract and staircase/lift lobby pressurisation system in case of fire. Now consultant has already given the CFM required for these Fans, but I have to submit the calculations for the same to the Local Govt. authority. So please help me if...

Airconditioners and circuit breakers tripping//urgent\ [ 6 Answers ]

Hi, Im writing from India. I got 4 1.5 tonne carriers split acs installed.carrier 1.5 tonne durakool. BTU per hours 18000.power consumption 1990 watts.eer 9.0. I have a three phase circuit board installed with individual 32 amp mcbs for acs and one single 40 amp elcb on each phase. ...

How do I increase H2O pressure on well system with a water filtration system? [ 2 Answers ]

Howdy, I would like to know how I can increase my water pressure. My current system uses a well pump with a small pressure tank, and "D" control valve. It then runs through a WATERSOFT filtration tank, RAINSOFT water softner, and on the Hot water side, an AQUASTAR on demand hot water system. I...

View more questions Search