 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Is there an air release valve (or something) that can be installed between a washing machine water supply (single handle dual hot/cold shut off valve) and the machine inlet hoses to release airlocks. Because I travel a lot I frequently turn off the main house shut off valve. Once I return and open...
Do you carry hot & cold hoses in the length of 12inches.
I am getting a new washer and want to put it in a different place that the old one. The problem is it's about 8 feet from the standpipe. Can I put on a longer piece of drain hose and use it? Thanks, Rick
We are putting a washing machine in the basement. The copper supply lines were pretty straightforward to add to our system, but I have some questions about the waste line design. As we get further into it, we've been wondering if our original design is too simplistic. There is an existing...
I have a Kenmore washer and have a problem of water backing up in the drain pipe. It seems that it drains too quickly and thus the overflow. I the drain pipe comes out of the laundry room floor and there is also a drain on the floor. Could I add on to the drain hose to possibly slow the flow down?...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
