Ask Experts Questions for FREE Help !
Ask
    postco's Avatar
    postco Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2012, 12:01 PM
    J10s goulds pump
    We have had to replacethe impeller and defuser several times. Our tenant swears that they are not empting the tank. What could be the cause

Check out some similar questions!

Pump lost prime and overheated motor runs but does not pump is the pump fried [ 4 Answers ]

Over night the pump lost primed and melted the sched. 40 fittings I replaced all the fittings and cannot get pump to prime the motor runs is it possible that the propeller was damaged from the heat?//

Grundfos recirc pump - ticking noise and pump warm to the touch - Normal? [ 2 Answers ]

We have an approx 8 y/old Grundfos recirc pump on our hot water line and today I notice it is making a ticking noise (first time I've noticed this) and it is "quite" warm to the touch--I've never touched it before so I'm not sure if this is always the case. Should I be worried? I don't recall that...

How to have goulds jet pump turn on sooner [ 1 Answers ]

Have a 1/2 goulds jet pump in my basement how do I set the pump to turn on sooner it turns on at 27psi I want it at 40 psi its shuts off at 50 psi which I like

Goulds j10s pressure problem [ 1 Answers ]

I have a goulds 1 hp with J10S and since I opened the impeller casing to clean the insides including the impeller I noticed that after re-assembling everything back it does not generate as much pressure and therefore volume vs. before I opened the casing. Is there something I should particularly...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.