Check out some similar questions!

Xx_sTuArT_xX · Aug 20, 2009, 08:03 AM

Hi,

I have been unable to connect to the internet in one of my laptops from the past two days. I have tried several things to fix it. Unpluging the internet router, ipconfig /release, ipconfig /renew etc etc.

When I do ipconfig in command prompt I am getting this:

Windows IP Configuration

Host Name.. . : Sid
Primary Dns Suffix.. . :
Node Type.. . : Hybrid
IP Routing Enabled.. . : No
WINS Proxy Enabled.. . : No

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . :
Description.. . : Intel(R) WiFi Link 5100 AGN
Physical Address.. . : 00-21-5D-63-9F-AC
DHCP Enabled.. . : Yes
Autoconfiguration Enabled.. . : Yes
Link-local IPv6 Address.. . : fe80::6d1f:bd8f:b2fa:2f5b%11(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.47.91(Preferred)
Subnet Mask.. . : 255.255.0.0
Default Gateway.. . :
DNS Servers.. . : fec0:0:0:ffff::1%1
Fec0:0:0:ffff::2%1
Fec0:0:0:ffff::3%1
NetBIOS over Tcpip.. . : Enabled

Tunnel adapter Local Area Connection* 6:

Media State.. . : Media disconnected
Connection-specific DNS Suffix . :
Description.. . : isatap.{38F30FC7-CFB3-4CE5-B201-02A85C12A5DD}
Physical Address.. . : 00-00-00-00-00-00-00-E0
DHCP Enabled.. . : No
Autoconfiguration Enabled.. . : Yes

Tunnel adapter Local Area Connection* 12:

Media State.. . : Media disconnected
Connection-specific DNS Suffix . :
Description.. . : Teredo Tunneling Pseudo-Interface
Physical Address.. . : 02-00-54-55-4E-01
DHCP Enabled.. . : No
Autoconfiguration Enabled.. . : Yes

I have no idea what the tunnel adapter is so I was not able to fix the problem. I tried to Google out a solution but cannot find any particual information.

I would appreciate it if anyone can help me out resolve this problem

Thanks a lot for your help

Sid

Curlyben · Aug 20, 2009, 08:10 AM

Set a static address within the range of the router. Something along the lines of 192.168.x.x.
Also check the DHCP settings on the router as it doesn't appear to be giving an address hence the 169.254.x.x unroutable one.

Xx_sTuArT_xX · Aug 20, 2009, 08:16 AM

Below is the ipconfig from my working laptop.

Windows IP Configuration

Host Name.. . : Sid
Primary Dns Suffix.. . :
Node Type.. . : Unknown
IP Routing Enabled.. . : No
WINS Proxy Enabled.. . : No
DNS Suffix Search List.. . : phub.net.cable.rogers.com

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . : phub.net.cable.rogers.com
Description.. . : Intel(R) PRO/Wireless 3945ABG Networ
K Connection
Physical Address.. . : 00-18-DE-BE-89-0A
Dhcp Enabled.. . : Yes
Autoconfiguration Enabled.. . : Yes
IP Address.. . : 192.168.0.100
Subnet Mask.. . : 255.255.255.0
Default Gateway.. . : 192.168.0.1
DHCP Server.. . : 192.168.0.1
DNS Servers.. . : 192.168.0.1
Lease Obtained.. . : August 20, 2009 10:17:25 AM
Lease Expires.. . : August 27, 2009 10:17:25 AM

Thx,

Sid

Curlyben · Aug 20, 2009, 08:19 AM

So trty 192.168.0.101
With sub of 255.255.255.0
And gateway of 192.168.0.1

Xx_sTuArT_xX · Aug 20, 2009, 08:26 AM

Which one should I try in. Internet Protocol Version 6 (TCP/IPv6) or Internet Protocol Version 4 (TCP/IPv4)

I believe it should be Internet Protocol Version 4

Curlyben · Aug 20, 2009, 08:28 AM

Yep that's a v4 format IP.

Also, worth checking the actual connection to your router as the encryption key on the wireless may be incorrect.

chuckhole · Aug 20, 2009, 12:08 PM

I think that Curlyben has hit the answer. When you get the 169. Address, it is because there is no connectivity.

When you get no connectivity on your wireless adapter but it says you are getting a good signal, then it is not making the full connection and it is likely because the security information is incorrect.

Also, if you have nearby neighbors with wireless routers or access points, then change your channel on your wireless adapter to one that is not a default (usually channel 6 is default). Select something on either end of your channel list. This will help prevent the continuous drops in your wireless connection because you and your neighbors hardware will not be interfering with each other on the same or almost the same channels.

Xx_sTuArT_xX · Aug 20, 2009, 06:59 PM

I can see a lot of wireless connection when I try to connect to my router. How do I change my channel on wireless adapter to one that is not default?

I am going to renew my DHCP and see how that goes.

Xx_sTuArT_xX · Aug 20, 2009, 08:19 PM

Originally Posted by Curlyben

Set a static address within the range of the router. Something along the lines of 192.168.x.x.
Also check the DHCP settings on the router as it doesn't appear to be giving an address hence the 169.254.x.x unroutable one.

Hey Curlyben how do I change the DHCP settings on the router?

Xx_sTuArT_xX · Aug 21, 2009, 10:51 AM

Any help please

Curlyben · Aug 21, 2009, 11:43 AM

You need to log into your router and ensure DHCP in enabled, that should be enough.

Xx_sTuArT_xX · Aug 21, 2009, 12:42 PM

its is enabled. But I cannot connect to the internet through my router. I can connect my computer to the rounter and it says I got a good signal but it is not getting connected with the internet.

when I check the view status I see

IPv4 Connectivity = Local
IPv6 Connectivity = Limited
Media State = Enabled
SSID = dlink

Xx_sTuArT_xX · Aug 22, 2009, 05:25 PM

Any help please