Ask Experts Questions for FREE Help !
Ask
    aowasiu's Avatar
    aowasiu Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Feb 2, 2012, 07:37 AM
    Help: lan, router, modem, server and clients
    I have a Wi-max router, a USB modem, 2 switches(one a 24-port switch, the other an 8-port switch), six client PCs and a server(actually another PC as the server).
    Before purchasing the router, I routed all internet connection through the server(that is while using the USB modem). Things were easy and uncomplicated, THEN.
    But now things have gotten complicated:
    Whenever I'm using the router, I have to use the wall clock rather than using my café billing software because I have to look up the time manually.
    My client PCs can access the internet it's just that I can't get my trial version of CyberKlock cafe-billing software to work whenever I'm using the router.
    Please help because it's driving me nuts.
    Fla_Instigator's Avatar
    Fla_Instigator Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Feb 9, 2012, 06:56 PM
    Where is your billing software running? There may be settings in your Cyberklock software that allow you to specify the IP Address ranges of the hosts you want to gather billing information on. The addition of the router has created 2 networks (1 facing your ISP, 1 facing your hosts). I am going to assume your router is dynamically allocating addresses to both your wired and wireless hosts, review that IP address allocation and see if your billing software can be modified to monitor that pool of addresses.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I can't connect to the internet even if I am already connected to the LAN server. [ 1 Answers ]

I am already connected to the server but still I can't connect to the internet... And even I an already connected to a wifi, still I am not able to connect to the internet... please. Help me solve my problem...

Modem router [ 5 Answers ]

Do I need 2 set up modem router on laptop as well as main computer to establish network connection? I want 2 use my laptop wireless connection but main computer is ethernet linked to router

Broadband Modem & Modem with Router (DSL-2640B) [ 1 Answers ]

When I'm connecting broadband using D-Link ADSL broadband Modem, the connected computer will connect to Internet after verifying username and password. If I'll replace that modem with D-Link DSL-2640B (A broadband ADSL Modem WiFi router) then will this router can connect to Internet automaticall...

Server 2003 use as a router and connect susulinux server [ 1 Answers ]

I have configure suselinux 10.0 webserver with two nic one ip:192.168.1.3 sub:255.255.255.0 And another is 10.10.1.3 sub:255.0.0.0 and primary dns server(suselinux 10.0) 192.168.1.2 sub :255.255.255.0 and secong dns server(suselinux 10.0) with differenet ip:10.10.1.5 and sub:255.0.0.0 Now one...

2 router lan [ 2 Answers ]

I'm at a complete loss here... Net goes into a 4 port Netgear router. 3 ports are directly connected to computers, one runs down to another room. In that room is a lynksys router, that used to be a 3Com hub. The line from the netgear goes into the router, then 2 computers are attached...

View more questions Search