Ask Experts Questions for FREE Help !
Ask
    mbsamjad123's Avatar
    mbsamjad123 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 8, 2009, 09:07 PM
    Configuring two different networks in a single PC
    I have to configure two diiferent networks in one system. For example, I have 2 networks. One is a Leased line VPN network and the other one is a broadband connection. The VPS network IP is 10.62.0.189 and the broadband ip is 220.225.194.225.
    Provide me step by step configuration of these two networks in one PC.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 10, 2009, 04:52 PM

    Hi,
    To begin with you will need a pair of NICs so that you can configure each to separate addresses through their MAC numbers. Yor VPN is a "private" or reserved address that does not "broadcast" its address.
    You have not said an operating system, but in Windows it happens by selecting the separate NICs in Device Manager to configure them. The OS will realize, or should, that by selecting each requires it to bring up menus where you select DHCP or define an address.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What is the difference between IP VPN networks and Ethernet Networks [ 1 Answers ]

What is the difference between IP VPN networks and Ethernet Networks

Configuring internet explorer [ 1 Answers ]

I have a computer running xp which can connect using MS messenger but not to the net using internet explorer get a message saying internet explorer not configured thanks john

Cannot re-configuring router [ 1 Answers ]

Had a wireless home network using linksys Wireless-B boradband router (802.11b) working fine but not password protected. Started seeing conflict between IP addresses on network w loss of connectivity, and thought it may be because outside computers trying to connect. Tried to introduce a password...

Configuring a WLAN adaptor [ 8 Answers ]

I have installed a Senao cd plus ext2 wireless PCMCIA card that unfortunately came without an installation CD. I downloaded and installed the drivers, and the Device Manager shows that the card is working. However, without the CD, I am unable to launch the Client Utility that would let me...

View more questions Search