Ask Experts Questions for FREE Help !
Ask
    nick13336's Avatar
    nick13336 Posts: 12, Reputation: 1
    New Member
    		  
    #1

    Apr 11, 2009, 02:49 PM
    Name for wire to connect speakers
    I have a Sony speaker system. The two main speakers connect with a cord with what looks like a square with four quadrants; does anyone know the name of this connection
    XM8's Avatar
    XM8 Posts: 213, Reputation: 14
    Full Member
    		  
    #2

    Apr 11, 2009, 03:43 PM

    Hey Nick,

    Could you please provide us with some more information? What model of speakers are they? A photo perhaps?

    -Xm8
    seahwk83's Avatar
    seahwk83 Posts: 3,276, Reputation: 212
    Ultra Member
    		  
    #3

    Apr 11, 2009, 09:26 PM

    Sounds like you just need speaker wire

    Strip the end of the speaker wire and then should be able to pull little tab above one of the squares and slip the end of the wire in

    If this is not it, as mentioned above, some more info on what you have there
    chuckhole's Avatar
    chuckhole Posts: 850, Reputation: 45
    Senior Member
    		  
    #4

    Apr 13, 2009, 08:43 AM
    Quote Originally Posted by seahwk83 View Post
    sounds like you just need speaker wire

    strip the end of the speaker wire and then should be able to pull little tab above one of the squares and slip the end of the wire in

    If this is not it, as mentioned above, some more info on what you have there
    I was thinking the same thing. The hole is usually on the side of the square.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connect speakers to laptop [ 3 Answers ]

I have a laptop and a music mixer software in my laptop and I wanted to connect it to the speakers of my house. Does anybody know how can I do it?

Where to connect the 'A' wire on a new thermostat? [ 13 Answers ]

I have a Coleman furnace and air-conditioner unit and I want to replace the thermostat. The old one has wires connected to the 'Y', 'G', 'W', 'R' and 'A'. I can't find where to connect the wire that was connected to the 'A' terminal on the old thermostat to the new thermostat. Would anyone...

How to connect home stereo speakers [ 1 Answers ]

I have just acquired a pair of Sharp stereo speakers that have an inbuilt sub-woofer. Each speaker has a separate set of connecting wires for the sub-woofer. Am I supposed to join the wires (positive to positive etc) and insert them into the same hole in the back of the stereo or should the...

Ok to connect 8 ohm speakers to 4 ohm stereo? [ 7 Answers ]

I have a mini stereo that comes with speakers rated at 4 ohms. I want to hook up the stereo to the in-wall speakers in the bathroom, which are rated at 8 ohms. Is this doable as-is? If not, are there any (reasonable) means of making it so? Thanks for any advice!

How to connect a 4 wire thermostat? [ 1 Answers ]

I'm trying to wire a 4 wire theromostat but I need to figure out what wire goes to the right terminal. The red is power, the green is fan, but the blue and the white I not sure. The Termostat is a hunter 40035a model. The terminals on it are rh,rc with a jumper wire and g fan, y air conditioner, w...

View more questions Search