Ask Experts Questions for FREE Help !
Ask
    neophitetechy's Avatar
    neophitetechy Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2007, 07:14 AM
    Default Configuration
    CISCO FIREWALL DRIVING ME CRAZY: Anyone know how to restore default configuration for Pix 501 Firewall. I have created a Hyperterminal link and I have used the enable command now I am stuck at the password.
    Quit Quit from the current mode, end configuration or logout
    Pixfirewall> configure factory-default [inside ip address [address_mask]]
    Type help or '?' for a list of available commands.
    Pixfirewall> enable
    Password: *****
    Invalid password
    Password: *****
    Invalid password
    Password: *****
    Invalid password
    Access denied.
    Pixfirewall> enable
    Password:
    Invalid password
    Password: ***
    benn11's Avatar
    benn11 Posts: 1,036, Reputation: 43
    Ultra Member
    		  
    #2

    Aug 17, 2007, 07:59 AM
    I think you need to do a password recovery and you can choose your cisco device type to get the recovery steps >>
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tc tuner configuration [ 1 Answers ]

Dear Sir; I have d845ewgew intel desktop board and 1.2 GHz inel processor I have installed TV tuner I only heard voice but cant'nt seen image I live in pakistan so I configure them to pakistan and in vga card I configure them as a vga card please solve my problem. ...

Configuration [ 4 Answers ]

I am having a problem with my aunts computer. OK, when I turn it on it just pops to the screen "windows detected registry configuration choose command prompt scan reg". I don't know how to scanreg, its weird. Can you please tell me how to scanreg. The starting up screen or anything doesn't come on.

View more questions Search