Ask Experts Questions for FREE Help !
Ask
    Alex_Swirsky's Avatar
    Alex_Swirsky Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 21, 2007, 05:42 PM
    Rdp ports
    Hi,
    I have a 2 computer coneccet to a di-524 router and want to conect to them with rdp,
    I open the port 3389 for one of them and wonder how can I configure that the other computer will be configured in the router for rdp,
    Ex1 192.168.0.10:3389 this the one I configured

    Ex2 192.168.0.5:3379 the one I don't know how to do this in the router

    Help me

    Best regards

    Alex
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #2

    Dec 21, 2007, 06:43 PM
    I found this site and it looks like what you need

    Using Remote Desktop with No-IP™

    Please rate my answer -- If it helps you resolve your question
    Alex_Swirsky's Avatar
    Alex_Swirsky Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Dec 22, 2007, 02:05 AM
    Quote Originally Posted by biggsie
    I found this site and it looks like what you need

    Using Remote Desktop with No-IP™

    Please rate my answer -- If it helps you resolve your question
    Hi biggest,
    I use the no-ip already,
    As I told I configured one of the computers in the lan :192.168.0.10 and in the router port 3389

    I want to configure the other computer 192.168.0.5 in the router in some port,lets say 3379

    I did a conect test from out side the lan with my no-ip adrres to port 3389 and its work,

    How can I make a rule in the router that port 3379 will be with 192.168.0.5

    Best regards
    Alex
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #4

    Dec 22, 2007, 05:46 AM
    Page 84 of the Di 524 manual. Changes are shown with "----->"

    Step 1 Open your web browser and enter the IP Address of the router
    (192.168.0.1). Enter admin for the username and your password (blank by default).
    Step 2 Click on the Advanced tab and then click Virtual Server on the left side.
    Step 3 You will create 2 entries.
    Step 4 Click Enabled and enter
    Settings:
    Click Apply and then continue
    Step 5 Enter 2nd entry:
    Click Enabled
    Click Apply and then continue.
    NAME - Gamespy1 -----> rdp2
    PRIVATE IP - The IP ---->192.168.0.5
    Address of your computer
    That you are running
    <whatever> from.
    PROTOCOL TYPE - Both ----> (Means TCP and UDP ports)
    PRIVATE PORT - 3783 ---->3379
    PUBLIC PORT - 3783 ------> 3379
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

USB Ports not detecting anything after. [ 2 Answers ]

My laptop Mecer, Model No. 755S14 has been working well until yesterday when I used someone's memory stick. After removing it all my USB ports can longer detect anything. I cannot even see them in device manager? What could have happened? How do I restore them? Assist? Ona.

My usb ports are broken! [ 1 Answers ]

All of a sudden my usb ports just stopped working. I really want to get my pictures and upload my iPod. How do I fix this?

Forward ports [ 1 Answers ]

Hi there I have forwared a port on my router and I now need to forward a port in my firewall program ( zone alarm ) and my virus program ( Avg free adition ) does anyone know how to do this

USB Ports [ 7 Answers ]

I ger error messages when I plug a device into either port on my PC... Do I have to replace it? If so, is it difficult, and about how much should it cost?. I have very little experience with this type of thing. Thanks.

Opening Ports on a router [ 5 Answers ]

Have just upgraded to ADSL and tried to access a couple of game sites but when I try to enter a game am refused admission (did all the normal things register etc). Have been told by the SITE that I need to OPEN THE PORTS on my router. I have no idea what they are talking about and was advised to go...

View more questions Search