Ask Experts Questions for FREE Help !
Ask
    irmanand's Avatar
    irmanand Posts: 6, Reputation: 1
    New Member
    		  
    #1

    May 29, 2008, 07:20 AM
    Connect two different network windows server 2003 without routing
    How to connect two different client PC and one server with windows 2003 with two nic
    One nic IP:192.168.1.2 mask:255.255.255.0 and second network IP:192.168.2.2
    Mask:255.255.255.0 now two client PC connect in same (unmanagable switch)

    Client 1 IP:192.168.1.3 and second client IP:192.168.2.3 now how to communicate this two client without routing and remote access oprion in windows server 2003
    Should I able to ping from client one PC to another PC how?
    chuckhole's Avatar
    chuckhole Posts: 850, Reputation: 45
    Senior Member
    		  
    #2

    May 29, 2008, 07:57 AM
    Since both network ID's are connected to the same physical network, they are exposed to your PC's. All you need to do on your PC is add a second IP address to the same NIC. The down side of this is that you can not use DHCP. You must change your TCP/IP configuration to manually configured addresses.

    So, go to the Advanced settings in your TCP/IP configuration and add the following IP addresses as follows:
    On the computer with 192.168.1.3, add a second IP address 192.168.2.4 with subnet mask 255.255.255.0.
    On the computer with 192.168.2.3, add a second IP address 192.168.1.4 with subnet mask 255.255.255.0.

    Then both PC's will be sitting on two networks. From the server, you should then be able to ping all four IP addresses with each computer responding to two each.
    ankitamity's Avatar
    ankitamity Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 7, 2011, 11:38 AM
    Hey I want to combine two DHCP servers with different subnet mask can any one please help me??
    ankitamity's Avatar
    ankitamity Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Apr 7, 2011, 11:40 AM
    I want to know how to combine two DHCP servers with different subnet mask can any one please help me?
    vkjawre08's Avatar
    vkjawre08 Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Feb 14, 2012, 11:10 PM
    HI,

    I have dsl and broad band connection but at a time I can use only one connection in my network.how want to use both bandwidht at a time in my network.

    Is IT possible .

    Kindly suggest.

    Vijay
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Windows 2003 r2 server [ 1 Answers ]

Dear All, I need a small help, I have windows 2003 r2 server installed and updated, whenever I plug in pen drive in the usb port the server gets hanged, there is no other solution rather than restart, since it a uprunning server and many users connected to it to access ERP installed in server it...

Downgrade windows 2003 server to windows 2000 server procedure [ 1 Answers ]

Hi.. Recently I planned to buy a server with windows 2k server OS. Unfortunately I was told that win 2k server will be no longer in support at 2007.:confused: What happen is that the application I need to run is under win 2k server only, can anyone advise me how to perform the downgrade...

Setting up Windows Server 2003 [ 6 Answers ]

Okay I have a few questions. First is my Cable ISP gives me a Dynamic IP Address. But I would like to set up a home net work with Windows 2003 server. I would like to physically set it up this way. Modem to Router with DHCP turned off on the router, then router to server with DHCP, then...

View more questions Search