Ask Experts Questions for FREE Help !
    jimkett's Avatar
    jimkett Posts: 1, Reputation: 1
    New Member

    Sep 8, 2012, 07:27 PM
    Blank display
    When my HP VS17d monitor comes out of sleep mode there is a blank screen and the blue power light blinks. Sometimes after more than 10 minutes it will start operating.
    Curlyben's Avatar
    Curlyben Posts: 18,492, Reputation: 1859

    Sep 9, 2012, 12:08 AM
    Don't use sleep mode..
    If it's just the screen, then turn it off and on again to reset the connection

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Trane twe060c15fd0 display blank? [ 0 Answers ]

Trane twe060c15fd0 that is Dead and a blank display

Chronotherm IV display goes blank when ac activated [ 1 Answers ]

I was changing out an old mercury switch dial thermometer for my AC to a chromotherm IV T8600D2028. I wired it as instructed with Y to Y, G to G, and R to Rc with a jumper to R. They also give a resistor to wire between Y and W. With this configuration the thermostat activates the AC but then goes...

Thermostat display is blank [ 6 Answers ]

I have a Honeywell programmable thermostat and the display is blank. We had a bad storm and the power went out. I have checked the breaker and reset it. The blower will come on when I switch it to ON, but nothing else works. Can someone help?

View more questions Search