Ask Experts Questions for FREE Help !
Ask
    billythekid's Avatar
    billythekid Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2009, 09:24 AM
    Looking for old flame

    I am anxious to find a person who I was engaged to in 1963.I only know her maiden name.please advise.
    Gem_22205's Avatar
    Gem_22205 Posts: 976, Reputation: 129
    Senior Member
    		  
    #2

    Mar 17, 2009, 01:18 PM

    If you can provide general basic information (ie) her name, brothers or sisters, mother or father, and location, that would be helpful. Or do you need a listing of free search engines?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Flame on - fan on - flame goes out [ 1 Answers ]

Thermostat calls for heat, ignitor comes on, burner lights, when hot enough for the fan to come on the burner shuts off. The fan runs for awhile and the ignitor comes back on, lights the burner, runs for a short time and everything shuts off. Then the cycle starts all over again but does not reach...

No flame [ 1 Answers ]

My Trane XE furnace blows cold air. The indicator light blinks 4 times,pause then 4 again.

No flame [ 3 Answers ]

I recently bought a home that's approximately 12 years old. The gas heater seems to be working fine, but no flame. I can smell gas, but it never shuts off unless I turn it off. A few months ago I had a similar problem where the sensor needed to be cleaned. The problem then was produce a...

No flame [ 1 Answers ]

My pilot won't ignite, and I get 3 flashes from the indicator light, stating either my pressure switch is jammed or vent is blocked, how do I know which is the problem, and is this something I can repair or do I need a specialist? [email protected]

Flame on! [ 4 Answers ]

Please HELP. I'm having a problem with my furnace rather it's my thermostat it's no responding to the temperature. I replcae it with a new one and it's still the same the second I turn power on the flame and fan blower turns on.What could it be. The wring it's only two wires. W and r.

View more questions Search