 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water pressure vs flow rate
Please discuss.
If there is main pipe with 3 branch pipes as sub-headers, each sub-header could give 1 bar pressure if the pump connected on it is working. If all pumps are working, is the pressure in the main pipe will increase like flow? |
||||
Check out some similar questions!
For a one half inch cooper pipe, what is the flow rate with a water pressure of 55 pounds per square inch?
Can water pressure be estimated from flow rate from a known size of pipe. I`m in the UK so metric units would be best for me Many thanks Michael
I am in the process of trying to determine the cause of extremely low water pressure and flow rate from my well. The well has a submersible pump (3/4 hp I believe from what I read on the control unit). The pump was working fine then during a week or so the pressure dropped significantly. I'm not...
Incoming water pressure is at 80 pounds. Infrastructure has had locked air problems in the past; but seems to be OK now. All tubs, sinks, etc. has a very low flow rate. Measured at 1 gallon every 30 seconds. In the morning, the flow rate is much higher - about 5 gal per minute but if you fill...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
