# Water is flowing into a frustum of a cone?
Asked Oct 7, 2011, 06:21 AM
—
| A swimming pool is 9 m wide, 15 m long, 1 m deep at the shadow end, and 3 m deep at the deep, the bootom being an inclined plane. If water is pumped into the pool at the rate of 3 cubic meter per minute, how fast is the water level rising when it is 2 m deep at the deep end? | ##
Check out some similar questions!
Water flowing into ice maker when using water dispenser [ 1 Answers ]
I have a GE profile side-by-side refrigerator. I noticed that water was dripping from the ice maker and getting all over the food in the freezer. Also the ice was all clumped together and wouldn't dispense through the door. I cleaned everything and removed the ice maker and adjusted it to make...
Related rates frustum of cone [ 1 Answers ]
Here is a related rates y'all may like to tackle.
"a circular tank with height 2 feet, radius on the top of R and radius on the bottom of r where R>r.
If R=6 ft and r=4.5ft, and it's filling at a rate of 15 ft^3/min, how fast is the height of the water changing when the water's radius is 5?
...
Water not flowing through hot water taps [ 3 Answers ]
I live in a house and I have had problems with a faulty ball cock valve in the water tank which I have replaced because it was not filling the tank at the correct rate. I have managed to get the water flowing through the cold taps but not the hot water taps. Is there a procedure for doing this. ...
View more questions Search Question Tools | Search this Question | | | ### Add your answer here. |