Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
2-wire hook-up from a Carrier stat to a 3M30 Filtrete stat?
[ 0 Answers ]
Ok what I have is a Carrier {edge}. Removing it to install a Filtrete 3M30. I have two wires coming from the wall. One white & one red. The back plate to the Carrier has a 4-wire hook-up. From the wall wires red go's to V White go's to Vg Then there are two wires coming from the back of the...
Lennox 51M33 stat to Hunter 44860 stat
[ 4 Answers ]
Lennox Heat Pump with Electric heat backup Lennox 51M33 wiring O - orange R - red G - green Y1 - yellow W1 / E jumper - white L - light red (pink) C - black T (Outdoor temp sensor) - blue
Replacing honeywell stat to an other honeywell stat
[ 19 Answers ]
I'm switching my old stat to a new one that lets me enter a program. I have an electric central air furnace and a thermopump outside that provides heat and AC. I'm going from a honeywell CT3600 or so (looks the same as in the manual for that one but without the program buttons) to a RTH8500....
18-3 t stat
[ 1 Answers ]
I have 18-3 coming out of the wall the problem is I have a new digital thermostat with no directions and I did not remove the old t-stat how do I find out what wire is what I live in a apartment with base board heat
Just 3 wire T-Stat connection, new stat, diff letters
[ 6 Answers ]
Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire... View more questions Search
|