Ask Experts Questions for FREE Help !
Ask
    anony12's Avatar
    anony12 Posts: 13, Reputation: 1
    New Member
     
    #1

    May 16, 2009, 04:23 PM
    how do i work out this q. on interference
    I'm just really stuck on this q and I really need help

    Q. What is the thickness of a surface coating of MgF2 whose index of refraction is n=1.38 and is designed to eliminate reflected light at wavelengths centred at 400nm when incident normally on glass from which n=1.50 (assume n(air)=1.0003)?

    A 96.18 nm
    B 108.7 nm
    C 72.49 nm
    D 99.67 nm

    If anyone can help... please
    thank you
    Perito's Avatar
    Perito Posts: 3,139, Reputation: 150
    Ultra Member
     
    #2

    May 17, 2009, 11:06 AM

    Q. What is the thickness of a surface coating of MgF2 whose index of refraction is n=1.38 and is designed to eliminate reflected light at wavelengths centered at 400nm when incident normally on glass from which n=1.50 (assume n(air)=1.0003)?

    A 96.18 nm
    B 108.7 nm
    C 72.49 nm
    D 99.67 nm
    The wavelength is 400 nm. The light is "incident normally", in other words, it comes in at a 90°0 angle.

    In interference films, the light passes through the film and then back. The path difference, in order to get interference, must be half a wavelength. If the thickness of the film is 1/2λ, the total path will be 2 x (1/2λ) = 1λ and you'll get constructive interference. To get destructive interference, the thickness needs to be half that or λ/4.

    You also need to take into account that the wavelength of light is not the same as it is in vacuum.

    The pertinent equation is

    where n is the index of refraction.

    thus



    where n is the index of refraction of the film, m is the order of refraction (we'll choose 1).



    The index of refraction of glass comes into play because it must be greater than the index of refraction of the film. The index of refraction of air (less than that of the film) indicates that there will be reflection off the top surface. This has to be taken into account in figuring out the equation because there is a λ/2 phase shift whenever there is a reflection. In this case, there are two reflections -- one at the top surface and one at the glass, so they cancel each other (I think)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Interference physics [ 4 Answers ]

I'm having a little trouble with these q's Q1. Constructive interference occurs at a given point when: A. The path difference between waves arriving from 2 sources at the point is equal to an integral number of wavelengths B. Waves from 2 sources arrive at the point with the same phase C....

Speaker interference [ 3 Answers ]

I have a Dell computer for about 6 years. The last few days I have been getting music, commercials, talk shows, cooking info, etc. through my speakers. This happens a few times a day, maybe for 5 to 10 minutes at a time, even when the internet is NOT on. My cable company has never heard of...

Interference of our car [ 5 Answers ]

Someone cut the brake line on our car, was it someone who lives near us?

Non interference engine vs interference engine [ 1 Answers ]

I wanted to know if anyone knew if the 2000 acura integra ls 1.8L dohc v16 had a non-interference engine or not? This would be helpful as I would know to what extent I would have to go to repair my car. Thanks.


View more questions Search