Ask Experts Questions for FREE Help !
Ask
    murad77's Avatar
    murad77 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 25, 2014, 07:03 AM
    Fluid engineering
    A centrifugal pump is used to supply water to a 10 floor building which consist of 35 flats each flat is occupied by 6 persons
    1-Work out daily water requirement the under ground and over head tank capacity Assume that each person require 35 gallon of water/day
    2-Estimate the pumping rate of the pump the pumping of water is controlled automatically using automatic water level switches.
    murad77's Avatar
    murad77 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jun 25, 2014, 07:20 AM
    Fluid engineering
    A centrifugal pump is used to supply water to a over head tank located at the top of a 10 floor building ,tank capicity=30cu.m, Estimate size of rising main to over head tank select most suitable pump from lawora pump catalog ,Estimate power require which fit in the system Assume total length pipe=50m,Elevation difference of water level 31m,fitting used=2 gate valve,6 elbow 90 degree,1 check valve ,Maximum running time of pump is 2hrs/day.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My dad has fluid in his elbow. Is it dangerous? And is it a fluid filled bursa? [ 2 Answers ]

My dad was diagnoes with elbow bursitis and he woke up this morning and he said his elbow looked like a sack of water. Is it dangerous? And is it the fluid filled bursa?

Which gives more salary ?(civil engineering or mechanical engineering) [ 2 Answers ]

Which gives more salary ?(civil engineering or mechanical engineering)

Brake Fluid Has Been Getting Lower in the Fluid Cylinder. Is Failure Imminent? [ 6 Answers ]

Hi, All! I was told by someone, who is not a mechanic by trade, that my brake fluid was getting lower in the fluid cylinder and that I needed a brake job. There don't appear to be any leaks, my brakes seem to work fine and there are no noises. He made it seem like brake failure was...

Do I need to remove some of my AT fluid before adding transmission fluid conditioner? [ 1 Answers ]

I bought a 20 oz. bottle of "lucas oil automatic transmission fluid conditioner" for my 93 ford taurus 3.8L V6 automatic GL. It has 145,000 miles on it. I want to add a 20 oz. bottle of this lucas oil transmission fluid conditioner but don't know if I should remove some of my AT fluid before I...

View more questions Search