Ask Experts Questions for FREE Help !
Ask
    captainakif's Avatar
    captainakif Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 11, 2012, 04:58 PM
    Hp dv6-7000 vs g6t-2000
    Dear Sir,
    I need an advice in buying my new laptop and I hope to get an expert opinion from you. I have two options dv6-700 and g6-2000 with following configurations

    –Pavilion dv6-7000
    Core i5 3210M 2.5GHz / two core
    RAM 4GB PC3-12800 (1600MHz)
    750 GB 7200 rpm
    Intel HD Graphics 4000
    WXGA (1366×768)

    –Pavilion g6-2000
    Core i7 3612QM 2.1GHz / four core
    8GB PC3-12800 (1600MHz)
    RAM 750 GB 5400 rpm
    Intel HD Graphics 4000
    WXGA (1366×768)

    Obviously from these configuration g6-2000 is powerful in terms of memory and processor. But the problem I am facing is, dv6-7000 has a very cool look, famous and recommended by many. Although I haven't seen these laptops in real but on the other hand g6-2000 looks are too simple/dull and I can't find even a couple of videos/reviews of this laptop . Does this mean g6-2000 is a flop?


    Please help me in choosing between these two with some solid reasons (if price is not factor). My usage is mostly web-browsing , multimedia and little bit programming.Thanks a lot in advance

    Regards

Check out some similar questions!

Increasing the resolution on hp pavilion dv6-2170us notebook [ 5 Answers ]

1366*768 is the current resolution. I want to install nvidia graghics. I used to have it on here but I reset the machine to factory and now I can't install it again. I downloaded the driver from the hp web site for this computer.

Linksys wrt160N and HP dv6... Linksys support basically had me set the setup to Mixed [ 2 Answers ]

Upgraded firmware to build 004 then the HP would not connect to the router. Linksys got me reconfigured but I was wondering: 1. He put me inMixed mode, not 802.11N only which is all I have. 2. He said use WPA not WPA2. 3. Picked channel 1 @ 20MHz instead of using 20 or 40 or auto. I am...

Heil 7000 [ 3 Answers ]

We have a Heil 7000 propane furnace. We had it installed in 1993 and haven't used it much over the years. This year when we started using it the motor had froze up and we replaced that part. Draft/flue inducer. I think is what it was called.Anyway after we reinstalled the part now the ignitors...

ZT 7000 will not start [ 1 Answers ]

My ZT 7000 zero radius turn riding mower will not start. Is there a schematic available

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.