Must be something to hide the cord going down the wall to the outlet.Perhaps Some molding or cable cover?

P2903.9.3 Fixture value and access.. Valves or stops to individual fixtures or appliances shall be required and the valves or stops shall be accessible on the same floor and within 3 feet of the fixture. Valves for a manifold distribution system may be located at the manifold or at the fixture...

I converted to sconces to plug in lamps with on/off switches as there was no readily accessible wiring for the area. The back of the sconce has a bare copper ground. I bought wire that has only a hot and neutral. If I mount these sconces on the wall, do I really need to connect the ground? Do...

I have an older home with wall mounted toilets ‘back to back‘ in adjacent bathrooms. One of the toilets is damaged and needs to be repaired or replaced. Both toilets have deposits built up over the years. Would it be more cost effective to replace one or both of the toilets with new wall mounted...

I have a 1970's electric wall heater unit that does not work. It is flush with the wall; has a metal grate cover; a single circular ceramic tube center and sits in a metal box. I have searched the internet extensively for a replacement unit... does anyone know where I might find one or if I can...