Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Placing insulation using metal studs
[ 1 Answers ]
Is there a way to attach insulation to the metal studs? There is got to be something better than tape, maybe a wire? Please help-=
Advice needed on framing - replace metal studs?
[ 2 Answers ]
I am looking for some advice regarding a "Yoga RopeWall" I am helping to construct for a friend's Yoga studio. A rope wall is basically a wall of 3/4" plywood with ropes hanging from it that are used for various Yoga poses. Originally, the wall was covered in mirror. When we took that down, we...
Low expansion foam between bottom of studs?
[ 1 Answers ]
I was wondering if it's okay to spray a few inches of canned foam between the bottom of wall studs. My hope is to seal off the wall from the room to prevent drafts, insects, etc. but I wasn't sure if it might create a problem with vapor/moisture/existing insulation. Thanks!
Wood or Metal framing for my basement
[ 1 Answers ]
Hi Everyone, I am in the planning stages of finishing my basement. My question is whether I should use wood or metal for the stud walls. Everything I've read indicates that metal is much easier to work with and, while researching the price of lumber and the metal studs, I discovered that there...
Metal vs. Wood stud walls
[ 2 Answers ]
Hi everyone, I am planning our basement and would like to get anyone's opinion on using metal vs wood to do the framing. Everything I've read indicates that metal is much easier to work with and can be done in a more quick time frame. I also did some research and the costs are identical... View more questions Search
|