Ask Experts Questions for FREE Help !
Ask
    richardch's Avatar
    richardch Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 29, 2006, 09:17 PM
    Corian finishing
    I have just sanded my corian counter tops after nine years use, and scratches came out nicely but it left a satin dull finish( I used 330 wet/dry) and some sander marks. Is there some polishing I need to do to the surface if so with what?
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
    		  
    #2

    Jun 30, 2006, 06:20 AM
    Yes, there are polishes designed for post-sanding corian.

    Lowe's and HomeDepot may carry them. If not, here are some online sources:
    http://froogle.google.com/froogle?q=...en&btnG=Search
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to splice corian pieces together [ 4 Answers ]

Hi, I have several pieces of corian window sills , and I need some good info on spicing them together to make one long one , can I biscut join them? could I dowel them? any info would be appreciated , and will I have to refinish the top to hide the seams or splices?? I've worked consrtuction for...

Corian counters [ 3 Answers ]

What is the correct tool to use for cutting a corian counter, to keep a smooth edge? Thanks

Unfinished corian [ 4 Answers ]

I want to buy a length of corian but want it to be unfinished.In its raw state so that I can finish it and not pay someone else to do it.Anyone have a clue what it runs for say a 5 foot length of this 30 inches wide.

Corian Counter [ 2 Answers ]

What tool would you use to cut Corian? I have a piece from an old kitchen counter that I want to cut into a 20"x20" cutting board. It is about 3/4" thick and the longest cut I have to make is about 24". Thanks

Corian refinishing [ 0 Answers ]

My Corian countertops are scratched, and I wanted to refinish them. Any ideas? (By the way, just tried a palm sander with 400 grit paper on one, and was left with sander marks and dull finish) thanks for any help.

View more questions Search