I converted a standard tub area with a tiled shower stall. The floor of the shower stall is tile. Under the floor tile the guys that did the work put cement board and then laid the tile directly on the cementboard. The grout keeps coming out and some of the tiles are loose. We pried them out,...

I am replacing a tile floor in a stall shower. I hve come across two (2) products that are used under the tile. The tile would be cemented to the product used.One product is called HARDIBACKER and the other product is CEMENT BOARD. I am at a lose as too which product is better. Does anyone have...

Not much on home improvement... this is my first major project. I cutted my entire bathroom and removed everything but the corner shower stall "base" any suggestions on how to do this? It appears to be connected at the drain and I don't want to break anything... Thanks.

I have a stand up shower on the second floor of the house. We've had two chronic issues lately. The hot water faucet is difficult to shut off and sometimes takes a lot of pressure to shut off Second, the shower often fills with water and is slow to drain. Last night we developed a...

My house is 15 years old and built on a slab. The shower stall is an enclosed corner unit made of fiberglass (I think all one unit) enclosed with glass. The slope of the floor of the stall has always allowed water to pool in the corner instead of flowing easily down the drain located in the...