Ask Experts Questions for FREE Help !
Ask
    bnesbnes's Avatar
    bnesbnes Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 21, 2008, 06:05 PM
    Installing Hampton Bay 3 level touch dimmer
    I have installed a three level touch dimmer from Hampton Bay, purchased at Home Depot. It consists of a touch pad and power strip. The touch pad connects to the power strip and my Xenon under-the-counter five puck lights plug into the power strip.

    The lights work if I connect them directly to a power outlet. When the lights are connected to the touchpad device, the lights work if I pull the touchpad's cable out of the power strip and reconnect it. The lights come on, but the touchpad does not dim nor turn off the lights. I have tried rotating the touchpad's cable in it's socket. No help.

    Any ideas, folks.

    Thanks for looking at this.

    Ben
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Mar 21, 2008, 07:30 PM
    Hey Ben, I had a bad touch pad straight from the box. Take it back to HD and try again. If you still have troubles just come back here.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing Hampton Bay Eastridge Ceiling Fan [ 7 Answers ]

My new ceiling fan came without installation instructions. Having installed 3 other fans the same week I attempted to install this one. To no avail... It did not work. I have two switches: one that controls the lights on the fan and one for the fan itself on the previous fan that I am replacing....

Installing a fan/light switch dimmer [ 2 Answers ]

Hello, I installed a harbor bay ceiling fan and light. Initially the lights did work, but not the fan, so we reconnected the wires for the fan and once we did that we had the fan working but then no lights. (This is inside the fan/light box itself, not on wall) When I went to install a new...

Hampton Bay Light/Dimmer [ 3 Answers ]

I am using Hampton Bay Light/Dimmer Model: FAN-HD Remote Controls to control on/off, dimmer and fan on Hampton Bay Pinnacle Remington II appliances and would like to use (very expensive but low energy use/low heat production) Sylvania Soft White bulbs (the kind with the twisty glass tubes, but...

Hampton bay remote control for hampton bay fans [ 2 Answers ]

We cannot get the ceiling light to go off on our fan in the bed room. It would not go on and in the middle of the night is just came on by itself and we can not get it off Joanne Moreland

Dimmer Hampton Bay Remote [ 3 Answers ]

I have a Hampton Bay Ceiling Fan with a remote. The remote fails to dim the lower lights. It works fine on the upper lights and the fan speed. Any idea of the problem?


View more questions Search