Ask Experts Questions for FREE Help !
Ask
    mikezimm10's Avatar
    mikezimm10 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 22, 2016, 05:01 PM
    Hunter Universal Wall Mount Control 99111 dims light automatically
    When I turn the light on my ceiling fan, over a short period the light dims to a very low level. I then hold the button to adjust the light to the correct brightness. It then slowly dims the light to a low level.

Check out some similar questions!

Hunter fan/light control #99111 problems [ 1 Answers ]

I bought 2 of these controls. The package and the instructions both say that it is a dimmer and will work on CFL bulbs. I bought dimmable CFL bulbs but it does not dim. Also, the instructions explain how to "pair" the control with the receiver but it doesn't work. One control controls one room and...

Harbor breeze universal ceiling fan and light wall control [ 1 Answers ]

I recently bought a Harbor breeze universal ceiling fan and light wall control for my existing wired fan. The existing wiring was two on/off switches (1 for the fan, one for the lights). The cable used in each case has a black wire, a gray wire, and a ground wire. When I hooked it up, the light...

Using Hampton Bay Wall Mount Universal Remote Control for multiple fans [ 1 Answers ]

We would like to install 3 Hampton Bay outdoor ceiling fans/lights on our patio. We have used the Universal Wall Mount Remote for other fans inside the house and would like to use the same remote for the 3 fans outside. Does this Wall mount remote #191-707 control 3 fans/lights? The package...

Hunter wall mount fan & light control (model 27186) [ 2 Answers ]

The Hunter wall mount control has two black wires and one green wire. How do I know which black wire goes to the black wire from the wall and which goes to the white wire from the wall? Or doesn't it matter which wire is connected to which

Ceiling fan light automatically dims and brightens and dims and brightens [ 2 Answers ]

I installed a new ceiling fan, it came with a remote. Installed a second in another room, and bought an add on remote control. In still another room, I added an add on remote control to an existing fan. All worked great for a week. Suddenly, none of the remote controls work, and the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.