Ask Experts Questions for FREE Help !
Ask
    bheffner's Avatar
    bheffner Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 4, 2011, 08:04 AM
    how do you install an iron lintel in a cinder block wall after cutting the wall open?
    I plan on cutting & opening 7' tall x 8' wide in an existing cinder block wall 8"x8"x16" that was laid with a stack bond (joint on joint). How do I insert an iron lintel 1/2" thick x 4" wide x 8'6" length? The length of the lintel is planned to go beyond the width 3" on each side. Is that enough and is 1/2" the correct thickness? The wall is 12' tall.

    Thank you.

Check out some similar questions!

Knocking down cinder block wall [ 5 Answers ]

My basement has cinderblock walls that separate the basement from the garage. I don't park in the garage and I wanted to knock down the wall to expand the basement. I wanted to save some of the garage for storage so I wanted to use the same cinder blocks to build the wall back up. Is this even...

Cinder block wall separating [ 2 Answers ]

Howdy We have an old workshop built completely from cinder blocks. The concrete foundation has shifted and so the back wall, which is 5o feet long, has started to separate from itself. There is a 'crack' starting from the top of one corner and continuing about half the wall traveling down to he...

Pouring a concrete wall in front of a damaged cinder block wall [ 1 Answers ]

I need to repair a well house that has buckling cinder block walls. The well is below ground with a shed above it. The room is approximately 9' x 8' and 8' tall with cinder block walls and a concrete floor. The block did not have concrete poured in it when it was built, the blocks are beginning...

Cinder block wall needs repair. [ 4 Answers ]

We have a cinder block wall in front of our property. Several cinder blocks have come loose and have fallen off. This makes our property look trashy. I would love some suggestions on not only how to repair this, but also on how to make this wall look better. Thanks you much, Bea Wilhelm

Mold on outside cinder block wall [ 2 Answers ]

I have black mold growing on my outside cinder block wall sourendering my back yard. I live in Las Vegas so the climate is dry but watering the lawns is causing the mold to grow since we have to water in the evenings so the water does evaporate so fast due to the hot climate. How do I remove this...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.