Ask Experts Questions for FREE Help !
Ask
    deej2u's Avatar
    deej2u Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 28, 2007, 07:05 PM
    Harbor Breeze Ceiling Fan
    HELP PLEASE... there are 1,000 holes in the Cheshire Harbor Breeze motor fan where the flanges should go. I can get 4 blades on without it rubbing but it is a 42 inch 5 blade set up. Does anyone know where I can get a close up picture that will show this models motor so I can distinguish where all 5 blades belong?

    Thanks for anyone's help

    Deej:confused:
    Stringer's Avatar
    Stringer Posts: 3,733, Reputation: 770
    Business Expert
     
    #2

    Oct 28, 2007, 09:08 PM
    I believe that this brand of ceiling fan is sold by many home stores such as Home Depot. They should have information for you... or a schematic of the motor.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #3

    Dec 21, 2007, 10:46 PM
    The threaded holes for the blade brackets are on the very bottom of the motor, not on the outer lip.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

HARBOR Breeze Ceiling Fan [ 16 Answers ]

We have a harbor breeze ceiling fan. The blades have quit turning but the motor continues to hum when switch is on. Any suggestions as to what the problem may be? I called Lowe's and they told me to turn the blades by hand with the switch off and if I heard a buzz it was probably the ball...

Harbor Breeze ceiling fan. [ 1 Answers ]

My ceiling fan w/ remote had water spilled on it, the power light flashed for a day then stopped. Now when I use it, I have power to two lights, speed control, but no stop or reverse. Please advise.

Harbor breeze ceiling fan [ 5 Answers ]

Where is the manual fan switch and light switch for the harbor breeze aero ceiling fan with the remote control. The remote says that the manual fan switch should be on high, and the manual light switch turned on before the remote control will work. I can't find the manual switches. Thanks

Harbor Breeze Ceiling Fan [ 4 Answers ]

My husband connected our ceiling fan/light and it has a remote control. By turning on the switch in our bedroom, the fan/light does not work. But if you click on the remote control and leave the switch to 'on' it worked. That worked for a week. Now it has stopped completely. No fan no light!!...

Harbor breeze ceiling fan [ 1 Answers ]

I replaced the pull switch for fan motor. In the process of rewiring the new pull switch, the black wire from old switch was not connected, so when I replaced with new switch I connected black wires. The light works but fan doesn't. The switch is a 4-wire pull chain switch.


View more questions Search