Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tile leak from 3rd floor through 2nd floor ceiling (bath)
[ 5 Answers ]
Hi All: We renovated our third floor bathroom which included stripping the floor down and installing tiles (1" squares within 1' blocks). After our 3rd floor tenant takes long showers we get some leakage through her floor and thusly through our ceiling (which we now have partially open to have...
Sub-floor for Tile
[ 1 Answers ]
I pulled up the linoleum in my bathroom and the sub flooring has water damage. It's pretty thick plywood. How do I pull that up? Its wedged in tight. I have a crowbar and it would be fun to use, but I don't want to ruin anything. The area is only about 5'x5'. It's in three sections. Can I...
Removing Hardset Tile Mastic from Concrete Floor
[ 1 Answers ]
I need to remove a hardset ( not glue type) mastic from a large area of concrete floor. The mastic is almost as hard as the concrete and must be ground down in order to lay carpet. I am currently using a floor belt sander with hardest grade paper. It's moving at just about a snails pace. Is...
Tile floor
[ 1 Answers ]
Hi, I want to put a ceramic tile floor in the bathroom. Presently there is 5/8 inch pressedboard for flooring with 1/2 in plywood subfloor. Can I put down a 1/4 in backerboard and tile, or due I have to cut out the 1st level of pressed board ? Thanks Tim:confused:
Raising a floor drain in concrete floor
[ 2 Answers ]
I have an old concrete floor with a newer pvc type drain. The floor slopes about 1.5" over 2' around the drain so I would like to raise the drain in order to level the floor to install ceramic tiles. I'm still going to ensure the floor slopes toward the drain just enough. I figure I need to... View more questions Search
|