If there is more adhesive on the floor than recommended and the installer used a 1/4" trowel, will the adhesive dry or does it stay live?
Add your answer here.
Check out some similar questions!
Help! My tile adhesive won't dry [ 3 Answers ]
Help! I lay down a floor of ceramic tiles on concrete with premix tile adhesive nearly two weeks ago now and only a select few number of the tiles have stuck, the ones that haven't stuck still have wet adhesive underneath them. The room is about 6m2, has no windows or heating. However it is in...
How long does flexible adhesive take to dry for ceramic tiles on a flexible floor [ 2 Answers ]
I have laid ceramic tiles on a flexible floor using the appropriate adhesive. Professionally laid (apparently) My question is, how long should I let set/dry before moving large heavy items such as dishwasher/washer back on to the tiles?
Tile adhesive won't dry and smells [ 7 Answers ]
My moms vinyl floor was coming up. After lifting the floor, I had some premixed tile adhesive and spread it and pressed the floor down on it. The floor is no longer bubbling up but it smells like sour milk. I realize now that I used too much glue and I didn't allow it to dry a little before putting...
Marble tile adhesive won't dry. [ 7 Answers ]
I have laid 12x12 marble tile in my foyer. I laid it on Saturday morning and now it is Monday morning and its still not set. It is on top of subfloor with a layer of this felt/plastic composite underlayment. I'm wondering if it won't dry because its by the front door and its cooler there or I did...
Tile adhesive will not dry [ 1 Answers ]
Have installed 12x24 inch porcelain tiles in our kitchen on top of old tiles. Used a premixed tile adhesive (which a friend used in his kitchen on top of old tile with no problem). After 5 days it has not dried fully (only dried in a few spots). Will it dry eventually or do I have to start over?
View more questions Search