|
|
|
|
New Member
|
|
Nov 7, 2007, 04:54 AM
|
|
Cutting corian counter top
What tools and what method can I use to enlarge a corian counter top cut out for a cooktop. I need to enlage the cutout by about 5/16 in in one dimension and 3/16 inch the other. The couter top is about 1 inch thick.
|
|
|
Ultra Member
|
|
Nov 7, 2007, 05:16 AM
|
|
A router with a carbide tip, straight blade, and a firmly clamped straight edge.
|
|
|
New Member
|
|
Feb 1, 2008, 12:53 AM
|
|
I need to cut a Corian countertop to convert a drop-in cooktop to a slide-in gas range. I need to remove the front section and slightly enlarge the cutout. How do I cut it without risk of destroying the rest of my countertop?
Thanks,
Erik
|
|
|
Home Improvement & Construction Expert
|
|
Feb 1, 2008, 07:39 AM
|
|
Set up edge guides, glued to counter top with hot melt glue, and use router with carbide bit to enlarge cut out or trim edges. A laminate trimmer may be necessary if you need to trim close to the backsplash
|
|
|
Senior Member
|
|
Feb 1, 2008, 03:13 PM
|
|
Just so you know any tools you use with wood cutting will work with corian... skill saws , jigsaws, routers
|
|
|
New Member
|
|
Feb 18, 2009, 01:19 PM
|
|
Originally Posted by KBC
A router with a carbide tip, straight blade, and a firmly clamped straight edge.
What about drilling through with 1" bit to pass water lines to espresso machine? Is a carbide bit necessary?
|
|
|
Junior Member
|
|
Mar 11, 2009, 08:20 AM
|
|
Texas Coffee
I am sorry that I have not been checking this forum lately.
A steel spade bit will work fine. Just take your time and allow the shavings to clear regularly.
I hope this helps
Ken
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Cutting existing laminate counter top
[ 3 Answers ]
Help, I am looking to do a low cost reno to my kitchen. I am hoping to reconfigure the existing lower cabinates and as a result need to cut the existing counter top. I have heard different comments as to how successful this can be. I need to cut the length to make a join and also remove an edge in...
Corian Counter top installation
[ 2 Answers ]
I was given 2 sheets of corian counter top from a builder friend of mine, how do I install and what do I use to cut it?
How to remove cambria counter top
[ 3 Answers ]
we need to remove a cambria kitchen bar top so we can lower the knee wall and reinstall, the installer won't come back. The knee wall is 2x4 with sheetrock and the Cambria was glued on top with liquid nails Any help would be greatly appreciated
Corian Counter
[ 2 Answers ]
What tool would you use to cut Corian?
I have a piece from an old kitchen counter that I want to cut into a 20"x20" cutting board. It is about 3/4" thick and the longest cut I have to make is about 24".
Thanks
View more questions
Search
|