Ask Experts Questions for FREE Help !
Ask
    JMIwinski's Avatar
    JMIwinski Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Mar 26, 2007, 01:42 PM
    Ceramic tile - proper laying technique
    I have 13x13 ceramic tiles to install in my kitchen over plywood subfloor. What is the most appropriate way to install? I've been told to use various techniques: cement mortar, thinset adhesive, cement backer board, tiles can be laid right over vinyl flooring!! ), etc. We are very handy and did lay large marble floor tiles in a cement mortar base very successfully, but that was 20 years ago. I know products and techniques have changed over the years. My current project layout itself is not a complicated design. I am most concerned with getting the install done right. I don't have any questions on grout or grouting techniques. Thank you.
    Duppy's Avatar
    Duppy Posts: 13, Reputation: 1
    New Member
    		  
    #2

    Mar 30, 2007, 05:12 PM
    I've been wondering the same thing. Seems that plywood would flex when walked on and your thinset would crack. But cement board would raise the floor so much that when it met another room, it would tower over it.
    Clear-Mind-Web's Avatar
    Clear-Mind-Web Posts: 16, Reputation: 6
    New Member
    		  
    #3

    Apr 5, 2007, 03:07 PM
    I wouldn't recommend laying tile on less than 1.5 inches thick subfloor.

    Normally for tile you will want ~1.5 inches of plywood and .25 inches of hardi-backer laid with some type of glue and fastener (screws recommended, have used liquid nails and roofing nails). I normally used 1 - 1 quart tube of liquid nails per 3x5 sheet of hardi-backer. They put the fastener pattern on the hardi-backer for you ;)

    Once the subfloor is down, it is *recommended* that you get the fiberglass mesh tape and cover the visible cracks an fill them in with mortar, making sure that you don't leave excess mortar on top of the subfloor. You should get good coverage on the tape, but only use enough to bond it to the floor (it shouldn't take much, but do fill the cracks).

    Once your subfloor is done you are ready to lay with a 1/4 x 1/4 trowel.

    Btw when I say mortar, I mean thinset mortar.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Drilling into Ceramic Tile [ 11 Answers ]

How does one drill into ceramic tile without cracking the tile?

Ceramic vs. Porcelain tile [ 2 Answers ]

I'm going to be tiling a bathroom. I'm told for the floor, porcelain is more durable and will be less prone than ceramic to cracking. This tile will be laid on a concrete sub floor. Will that fact help even the durability factor between the two types of tile? What would your preference be for...

Ceramic Tile on Overhead Arch [ 1 Answers ]

I plan to tile a small overhead Arch in my Foyer (3'x5'). I was planning to use small 1x1 mosiac tiles. 1). How is the best way to secure a backing to the arch? (I thought wonder board with scoring every 1" on the back and bend it then screw it to the frame)? 2). Do you think a wire mesh...

Ceramic Tile as baseboards [ 2 Answers ]

Hi, I had some of my rooms tiled by a pro and he took off my wood baseboards and made baseboards from the tile. I am now trying to tile another room on my own. Does anyone know how to make the baseboards ? Do I baseboard 1st or floor tile 1st ? As specific as possible would be great! Thanks

Ceramic Tile Baseboard [ 1 Answers ]

Hello - I am putting in a ceramic tile floor in a bathroom and plan on cutting the tiles and using them for a baseboard. Is there a correct size that this baseboard should be? And should I put anything on the top edge of the tile to finish it off? Any information would be appreciated. Thanks!

View more questions Search