Ask Experts Questions for FREE Help !
Ask
    Beglad9's Avatar
    Beglad9 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 20, 2010, 03:13 PM
    Can 8 inch center holes be changed to 4 inch on solid surface counter?
    We are renovating our bath and were told that the solid surface double bowl Pegasus counter we purchased would fit our faucets which are 4 inch center. When we started to install the counter it was for 8 inch center faucets. We cannot return our faucets which were very exppensive because of lead laws in our state of Vt. We're hoping someone can tell us if we can fill in the faucet holes and then redrill to the correct position. Oh yes, we can purchase a matching splash bar to use for the fill. Does anyone know how much a pro mught charge for this repair? Any help offered will be greatly appreciated. Thank you.

    Debra
    mtconc's Avatar
    mtconc Posts: 119, Reputation: 9
    Junior Member
    		  
    #2

    Sep 21, 2010, 01:35 PM
    I looked online and there is a place in ST J,
    Not sure where you are in vt but from st johnsbury they might go to you.. vermont solis surface
    Better to have a pro do this than make this your first "try"
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can you replace a 4 inch cast iron soil stack with 3 inch pvc? [ 3 Answers ]

I recently purchased a home built (I'm guessing) in the early 1900's. I noticed a leak in my basement coming from the old 4 inch cast iron soil stack running from my second floor bathroom to the basement. There is water dripping down the pipe to the basement. Three plumbers have come out to...

How do I connect 3 inch sch 40 to 3 inch copper . The o. D. Of the copper is 3 inch [ 2 Answers ]

I am remodeling an old house with all copper plumbing except for the cast iron that comes out of the basement floor. Some of the copper drain line is bad so I am trying to connect to the copper with sch 40 3 inch pipe. I can't seem to find a no hub band to make the connection. The o.d. of the...

How to install 72 inch long by 4 inch tall Marble Vanity Backsplash [ 2 Answers ]

I just installed a new 72 inch long Marble vanity in my bathroom. It came with a 72 inch long by 4 inch tall Marble Backsplash. How do I install this backsplash? Do I just put an adhesive behind it? What about the gaps? How do I fill the gap of the top of the backsplash where it hits the...

What's the most accurate measuring for solid surface counter? Template or Laser? [ 5 Answers ]

The DH and I are shopping for solid surface countertop. We are trying to decide between companies to use. One requires the countertops to be removed and then they make a template and we wait... without counters... for the new ones to come in. Another uses a laser measurement tool to...

27 inch RCA is solid green [ 2 Answers ]

Hi: I have a 27 inch RCA TruFlat television. It is approximately 2 years old. When I turned the TV on, the picture turned all bright green (like the color of a highlighter), with lines running horizontally through it. It remained this way for about 15 minutes, and when I turned it on and off a...

View more questions Search