Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
My shower drain is raised above the shower pan by 3/16" causing standing water
[ 2 Answers ]
I have a fiberglass shower stall where the bottom has either slumped or the stall was installed wrong to begin with (it has no support beneath the surface that I stand on). The drain sticks above the level line so I have about 3/16" of standing water. I cannot easily access the bottom from the...
Removing shower drain for shower pan replacement
[ 1 Answers ]
I am in the process of removing an existing shower tray. I am having difficulty in removing the drain. It does not appear to screw in. I have access to from below if I need to cut pvc pipe. This appears to be the only thing keeping my tray in place at this time.
A/C not cooling, Small Copper pipe COLD and Large Copper pipe room temp.
[ 4 Answers ]
I just moved into a newly constructed townhome and the a/c units are of course new. The A/c is not cooling at all. The machine inside turns on as well as the one outside. The inside A/C makes a strange sucking sound kind of like if you were sipping something out of a cup with a straw and you ran...
Soldering copper pipe to shower valve
[ 10 Answers ]
I have a shower valve body (brass) and am trying to solder copper pipe to it. For the life of me I can't seem to get the pipe and fitting hot enough to melt the solder. I noticed soldering copper pipe to the drop elbow took more flame heat than normal. Is there some trick when soldering copper...
3/4" copper pipe for washer drain?
[ 20 Answers ]
Parents moved into new ranch style house, and bought new washer/dryer. Drain for washer is what looks like a 1" copper stub with a 3/4" conversion fitting on it. Its about 6" off the ground. plastic bendable hose drain for washer has a rubber gasket-type fitting around it which fits in 2" PVC... View more questions Search
|