Originally Posted by
ac101
If it were me I would pull the old laminate out and fix the problem at the root. If that is not an option the some type of filler needs to be used as far as the leveling compound over the existing laminate the salesman was right it will most likely crack. Post back and let us know whether removing the old laminate is an option. GOOD LUCK, AC
I actually have a similar type of leveling problem with my kitchen floor, which now has cushion floor on it, and we'd like to install laminate. We have a basement, but I don't see how that affects how I could make the floor more level on top. Every 3rd floor joist is a bit higher than the ones on the middle, causing a downward bow, or dip between the staggered higher joists (anywhere from 1/2" to 3/4")
So how to I "even" up the floor to allow me to safely install the laminate ?
The guy at the hardware store suggested I pour the self leveling wet concoction between the high joists (which is where the floor is at it's lowest) but he didn't say anything about it eventually cracking, which I agree, could cause problems down the road. Would I be better to shim extra layers of underlay foam to the recessed areas, or is there another substance or material I could us for the job?
Thanks for any info you can give me.