Ask Experts Questions for FREE Help !
Ask
    brookman's Avatar
    brookman Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Jan 17, 2012, 04:00 PM
    DSC pc1832 installation/programming
    I'm installing the DSC1832 in my home. Here's how I wired:
    1) Zone1= upstairs motion (4wire) red to Aux , blk to Aux-, yellow to Z1, Green to Com.
    2) Zone2= downstairs motion (4wire) " " " " " " Z2 " " "
    3) Zone3= upstairs smoke (4wire) red to Aux , blk to Aux-, yellow to Z3, Green to Com.
    4) Zone4= upstairs smoke (4wire) "
    3) Zone3= upstairs smoke (4wire) red to Aux , blk to Aux-, yellow to Z3, Green to Com.
    4) Zone4= upstairs smoke (4wire) " " " " " " " Z4, " " "
    5) Zone5= downstairs smoke (4wire) red to Aux , blk to Aux-, yellow to Z5, Green to Com.
    6) Zone6= downstairs smoke (4wire) " Z4, " " " " " " " Z6, Green to Com.
    7) Zone7= Temp. Alarm (4wire) red to Aux , blk to Auz-. Yellow to Z7, Green to Com.

    I just can't seem to figure out the programming for this? Can anyone help?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jan 19, 2012, 07:38 AM
    In location 001 you need to program the 2 digit zone description for each zone in a 16 digit string of the 32 as this location now goes to 16 zones.
    I don't see a door contact for entry. You can Program Motion as a perimiter and give it a delay to allow time to dissarm. If you had a Wireless fob for arming. Motions could be all Interior.
    Can you get into Programming?
    Also, If you use a PGM output, it will allow resetting of your smokes.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Programming DSC PC1832 alarm [ 3 Answers ]

HI... How do I change the delay time on a DSC PC1832 STAY-ARM key to 30 seconds delay. Thanks

Dsc pc1832 [ 1 Answers ]

I am installing a DSC PC1832 in my home. I have four 4-wire leads for five Smoke Detectors. Can I place all four common leads with two each on the PGM1 & PGM2 terminals?

Programming a DSC PC1832 [ 6 Answers ]

Hello, I'm installing and programming a basic home security system. I'm using a DSC PC1832 control panel. I have 2 keypads and a number of devices (door and window contacts, pir's, smoke and heat detectors). The home is divided into 2 suites (owner's and tenant's) and I've partitioned the...

Prgramming the DSC PC1832 [ 3 Answers ]

I bought a PC1832 which gave me a big headache and spent one full Saturday without success. I connected the hardware but had major issue programming the system. Due to incorrect data entry, I believe the system locked up and all what I see is a symbol of keypad on the screen and --:--. As soon as I...

Programming manual dsc pc1832 [ 2 Answers ]

I am looking for a programming manual for a dsc pc1832. Could anyone point me in the right direction. Thanks

View more questions Search