| After installing the piercing valve is supposed to be open to allow the water to pass |
Asked by EWJIII, Yesterday 10:00 AM in Appliances
Having installed the saddle and piercing valve am I supposed to open the valve
| Where can I find a connection schematic for model 585hj024040 |
Asked by ruethecue, Yesterday 10:46 PM in Heating & Air Conditioning
Roof package unit from bdp co.
Model # 585hjw024040. Found a symbolic schematic but need a connection schematic.
| Sink |
Asked by Cmahon1344, Yesterday 05:14 PM in Interior Home Improvement
How do I cut old sink out of solid surface countertop?
| Toilet And well pump issue |
Asked by DinoM, Feb 25, 2017 09:40 PM in Plumbing
After having so much trouble with trying to stop a leak from 40 plus year old PE pipe, I had to bite the bullet and get a new line run from well to...
| My blower fan won't work. |
Asked by Bigsexytony, Yesterday 11:39 AM in Heating & Air Conditioning
My blower fan won't work in the manual mode. It will not blow in the ac mode, nor will it blow in the heat mode. It does work when the aux heat is on?
| Magnetic bit holder |
Asked by pastor1189, Yesterday 07:48 AM in Tools & Power Equipment
Have a lot of so called magnetic bit holders. They hold the screwdriver bits okay.
But the screw itself falls off. Is there a screw holder rather...
| 84 Datsun Nissan 300ZX Turbo High Idle |
Asked by DanPatrick10, Feb 24, 2017 05:31 PM in Cars & Trucks
Engine idle for this model car is supposed to be 700 rpm plus or minus 50 rpm. When I first purchased this car, I noticed the engine idle speed was...
| Steering wheel wobble |
Asked by pastor1189, Dec 26, 2016 10:22 AM in Cars & Trucks
Maybe it is something else
Just had a new rack and pinion put in. But steering wheel still wobbles
As before? But less at a higher speed. Going...
| Reset a Kenmore Dishwasher Mode # 587.1524 |
Asked by alpavelka, Jan 1, 2011 11:01 AM in Appliances
I have a Kenmore Dishwasher, Model # 587.1524, the 'Washing' light is flashing and the dishwasher will not start. Would anyone happen to have the...
| Dsc security DCS pc1832 reset |
Asked by jstigler, Feb 20, 2017 01:52 PM in Home Safety & Security
Installers code factory 5555 doesn't work. I did the factory jumper pwr off/on and it did not reset. When the pwr was applied after the reset the...
| How to repair cast iron toilet flange |
Asked by Bareboat, Feb 22, 2017 08:38 PM in Plumbing
I have a concrete floor and a cast iron toilet flange . One side has broken where the toilet bolt goes on one side. There seems to be a space between...
| Well pump on and off |
Asked by tableclocks, Feb 23, 2017 02:29 PM in Plumbing
my well pump, JHU05 1/2 hp, open pressure, the pump running is about 20lb, when I shut the value off to let to hold pressure the pump motor is on and...
| Which color will be the best for my room? |
Asked by loardeva, Feb 24, 2017 06:02 AM in Other Home & Garden
The base color of my room is Sky Blue. Can anyone tell me which color will match it with it? And what color can be the best for other things like -...
| Oil Change Frequency |
Asked by ScottGem, Jan 29, 2017 05:31 AM in Cars & Trucks
We don't drive our cars a lot, usually 7-8K miles per year.
We just got my wife a 2017 Subaru Legacy. The dealer said we should do oil changes...
| Replaceement theremostst Maple/chase0960 |
Asked by Elmo5440, Feb 24, 2017 11:50 AM in Heating & Air Conditioning
Replacement for 0960 Maple/chase standard. Will Robertshaw 9610/110-655 work?
| Buzzing furnace and a lot of dust |
Asked by dustyducts, Jan 30, 2007 04:02 PM in Heating & Air Conditioning
I have a Bryant Quietline Deluxe furance model 397EAW036100. I have been told it's between 20 to 30 years old. It makes a loud buzzing noise when...
| Toilet refresher hangs on lip of bowl flushed down toilet |
Asked by Bareboat, Feb 23, 2017 06:03 PM in Plumbing
I bought one of these toilet bowl blue cleaners attached to a plastic clip that hangs on the lip of the toilet bowl. This is on a new toilet and the...
| Should I remove toilet tank again |
Asked by standur46, Feb 23, 2017 08:34 PM in Plumbing
I am concerned that I may have over tightened the nuts on the 2 toilet tank bolts. I had a slight leak - probably coming from the gasket at the...
| Wiring old electric appliance motor for 115V |
Asked by pwd77, Feb 19, 2017 10:22 AM in Appliances
I have an old motor I would like to hook up to household 115 AC.
After doing some research and looking at the inside of the unit, it appears that...
| Rice Dough Ratio to Baking Powder |
Asked by Siony, Nov 17, 2014 07:19 PM in Cooking
I want to use baking powder in my rice dough which will be used for steam cake. If that is possible what is the ratio of rice dough to the baking...