Ask Experts Questions for FREE Help !
Ask
    computerdude7's Avatar
    computerdude7 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2010, 12:07 PM
    Trying to find DIP code on my Overhead Door model 45a
    I have an Overhead Door model 45a garage door opener. I am trying to find the DIP switch settings on the unit. Can anyone tell me where to look?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Dec 6, 2010, 04:18 PM
    Some of them are under the cover for the unit, on the control board. You may need to remove the light and then 4 screws and take off the cover. Others are located on the back of the unit. Get a step ladder and look. Some don't have dip switches, they are smart button controlled and roll the code every time the door is used. Have you contacted Overhead Door Co? They are usually helpful.
    tomn's Avatar
    tomn Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Aug 16, 2011, 08:34 AM
    Call Overhead Door and talk with the parts department. They told me there were several variations on how this model works. Mine had a series of looped wires on the circuit board. I told them which wires had been cut and then they looked up the corresponding dip switch code for me.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Overhead garage door 45A [ 14 Answers ]

Garage door opener works fine. Opens from wall. Need to know where the remote code is in the opener since the remote works fine. Took off cover and cannot find schematic for where the code for the remote is inside the opener. Need the coding for the remote or where it's located in the unit.

Overhead garage door model 556 cannot come down automatically. [ 7 Answers ]

With the above model I have recently experienced failure of closure of the door with return to open position. I have to push wall unit switch all the way till door come down to close, then door auto go up again when it touch the ground which I need push switch again to ensure door is closed. I have...

Overhead garage door opener model 45A [ 3 Answers ]

I have a overhead door model 45A it opens the door fine, but slides back about a foot after its opened. When trying to close the motor hums but won't engage to close. Any hints on adjusting it to correct problem? Thanks

I have a Model 65A Overhead garage door I am looking for a universal remote. [ 1 Answers ]

HELP.. I dropped my universal remote and it no longer operates the garage door. The switch in the garage opens the door and the button in my car operates the garage door. I am looking for a remote to open for my bike. I cannot determine the frequency because it's not on the unit. I do know...

View more questions Search