Ask Experts Questions for FREE Help !
Ask
    Gary Poquette's Avatar
    Gary Poquette Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 31, 2006, 01:35 PM
    GE motor
    I have a GE motor that I believe is from an old washer. It has 5 wires. Black to white is 0 ohms, red to white or red to black is 3.9 ohms, yellow to blue is 2.0 ohms. There appears to be "no" centrifugal switch, so I don't think it's a capacitor start but with all the wires I think it might be a capacitor run. Can someone tell how to wire it, so I can use it to drive another piece of equipment? The GE model no. is 5KH42DT 19S, 1/3 HP, 1725 rpm.
    Thanks
    Gary
    Morrowrj's Avatar
    Morrowrj Posts: 345, Reputation: 22
    Full Member
    		  
    #2

    Jan 1, 2007, 06:37 AM
    While I don't know the configuration for your motor, here is a good link on various motor types in general. Leeson Single Phase Electric Motor characteristics and applications


    Good Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Motor or Capacitor? [ 2 Answers ]

How can you rule out a bad capacitor? Is the only way by ohms?

AC Fan Motor [ 4 Answers ]

What is the difference in the wiring for a 3 speed motor and a 4 speed motor? I'm having trouble with the reconnection of the new motor.

AC Motor [ 1 Answers ]

How Do You Rewire a AC Motor that is used on Conveyors?

Squeaky AC motor [ 1 Answers ]

A chirping noise is coming from my AC unit. I think it is coming from the fan motor. The squeaky chirping noise (sounds like a cricket) kind on cycles so that during a cooling cycle, the fan will go from making no unusual noise to this squeaky chirping noise and then back to no noise again. Do you...

My motor is shaking [ 2 Answers ]

I just took my 91 honda civic for a 5 hour ride yesterday in the pouring rain. About half way in the trip my car started losing speed so I got on the side of the road and turned it off. After 10 minutes of letting it cool off I drove it the rest of the way. Sometimes it would lose speed/other times...

View more questions Search