Ask Experts Questions for FREE Help !
Ask
    stp_lsd's Avatar
    stp_lsd Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Aug 16, 2011, 06:25 AM
    Panasonic model th-42px80u will not power on. The outlet is functioning.
    The outlet works when other things plugged into it. The power cord looks brand new, no nicks/kincks. Makes no noises at all and it's as if it is getting no power at all.
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #2

    Aug 16, 2011, 02:22 PM

    Is there a red standby light? If so does it blink when you plug it in? How about before or after you try to power it on?
    stp_lsd's Avatar
    stp_lsd Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Aug 16, 2011, 03:17 PM
    Unfortunately, there is no standby light.
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #4

    Aug 16, 2011, 03:31 PM

    Okay, that's a problem. Haha. Make absolutely certain that the power cable is secured to the back of the TV. If so, then you could have a bad power supply or a bad main board. You will want to call Panasonic or the retailer you purchased from to see if it is still under warranty to have it serviced.
    stp_lsd's Avatar
    stp_lsd Posts: 4, Reputation: 1
    New Member
    		  
    #5

    Aug 16, 2011, 03:58 PM
    Thanks. It isn't under warranty any longer. Any idea how much this repair might cost?
    FadedMaster's Avatar
    FadedMaster Posts: 1,510, Reputation: 148
    Ultra Member
    		  
    #6

    Aug 16, 2011, 04:07 PM

    Well, assuming it is just the main or the power supply you'll probably be looking at $200-400.

    Call around to get an estimate though.

    I know GeekSquad has a promo where it's only $150 for labor plus whatever the part is, nothing more (except tax).
    stp_lsd's Avatar
    stp_lsd Posts: 4, Reputation: 1
    New Member
    		  
    #7

    Aug 16, 2011, 04:14 PM
    Unfortunately, there is no standby light.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier model 58STX070- motor blower not functioning, regardless of setting. [ 0 Answers ]

No air is coming in through vents, regardless of heat or fan only setting. Turn off switch that powers furnace, and opened it. Turned it back on, you can hear humming, meaning power is going through. Status LED is on. Motor not moving, but feels hot to the touch.

New breaker, 1 outlet, no power at outlet [ 2 Answers ]

We have installed a new circuit breaker to the box for an addition in our home. After wiring the first outlet to the new circuit we tested and do not have power to the outlet. After checking the breaker making sure it was not tripped and double checking the connections on the outlet, we still do...

Electrical partial-power-loss power to the outlet on one side and the ground [ 2 Answers ]

I have partial-power-loss as a result of a heater and christmas tree plugged in the same line in my home. The problem I 'm having is that each outlet that was affected still has 115V on ether side and ground , is this the result of a hot attaching itself to ground somewhere in my wall? And how...

Wire Motor for 220 outlet Power from 110 power [ 1 Answers ]

I need to wire this sander for 220 power and do not understand the diagram well enough. Currently I believe it is wired for 110 shown in picture. Please advise about correct wiring for 220. Thank you 2 attachments

View more questions Search