Ask Experts Questions for FREE Help !
Ask
    gabriele's Avatar
    gabriele Posts: 18, Reputation: 1
    New Member
    		  
    #1

    Mar 15, 2008, 09:23 AM
    non working TV
    Can anyone help me = my TV has stopped working - when I switch it on it goes into standby mode as usual and the red light comes on as usual - then when I switch it on the green light just keeps flashing - instead of staying on and I cannot get any proggrammes
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 15, 2008, 09:31 AM
    Other than internal troubleshooting, you could unplug for a minute, plug back in and hope for the best.
    Eng65's Avatar
    Eng65 Posts: 17, Reputation: 2
    New Member
    		  
    #3

    Mar 17, 2008, 07:23 PM
    The TV has a fault in internally. The flashing is self diagnosis the flash rate is an indication that would tell an engineer where the fault lies. PSU fault or Frame fault.

    Eng65
    biggsie's Avatar
    biggsie Posts: 1,267, Reputation: 125
    Ultra Member
    		  
    #4

    Mar 17, 2008, 09:35 PM
    Try unplugging the unit and while unit is unplugged hold the volume up button and channel down buttons down and while depressing both buttons plug the unit in. Let go of the buttons and the unit should come on in the service mode. There will be a small k on the screen. With the sharp remote press the channel up button once. This should bring up a menu that will show a lamp error line. If the lamp error is = to 5 the unit is in lamp error shut down. User channel down to highlight that line and curser right arrow to highlight the lamp error #. Hit the enter button to clear the lamp errors. Now unplug the unit and let it sit for a minute and plug back in. I hope this corrects the problem. If the unit does not come on by doing this or if it does and you do not find lamp errors the power supply pcb may have been damaged by the surge.

    Is this a mitsubishi ws-55513 TV
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dodge Ram A/C working, then not working [ 4 Answers ]

I have a 2001 Dodge Ram 1500. Within the last year whenever I turn the a/c on it will work fine and after about 5 or 10 minutes will start to blow hot air as if I turned the a/c off and had the fan blowing outside air. At first I started turning the a/c off and then back on which would...

Fridge not working then started working [ 2 Answers ]

I have a side by side whirpool refridgerater it is two years old when I got home it was not cooling the fans were on but compressor was not on as soon as I walked away the compressor came on but within two minutes it clicked off so I thought it might be the overload but then it kicked back on and...

Previously working electrical outlets stopped working [ 2 Answers ]

Hi Everyone A wall of electrical outlets in my kitchen just stopped working. They were working just fine about a month ago. I tried checking the circuit box, and turning the circuits on/off just to make sure anything that has been tripped was turned on back again. But it didn't work for the...

View more questions Search