We have a Harbor Breeze model #136954. It has a remote and no pull chains. The remote "sensor" is not part of the fan assembly, but a separate unit that rests up inside the canopy in the mounting bracket. There are green (ground), black, white and red wires coming from the house. There are one...

Hello all, I'm trying to install a ceiling fan in an old house (about 60+ years). I have a new ceiling fan with 4 wires, black, blue, white, and green. On the ceiling, there are only three wires, 2 copper wires (unfortunately no colors, just a dark covering over both), and a green wire, which has...

I have 3 way switches (2 wall switches) in my living room operating 1 ceiling fan/light. I bought a remote kit for a new ceiling fan and want to know how to wire it. It comes from the factory for a 2 way. There is a switch unit that goes in the wall to adjust for low/med/high for the fan as well as...

I'm replacing an old fan/light with a new one. Fro mthe ceiling I have black, red, white, and ground wires. Fro mthe fan/light I have black (fan), blue (light), white, ground wires. I have two 3 way switches that both do the same thing- provide power to both fan and light. I'd like to keep it...

We have put in a ceiling fan w/light kit attached in our kitchen. To set the scene, we have 2 lights, 2 switches plus the ceiling fan (which was a regular light). The switches are 3 way and will turn all the lights on or off. When we wired the fan, we capped of a black and a white and grounded...