I'm scratching my (sweaty) head with this one. Last fall I disconnected my A/C unit to accommodate an extension on my house. At the time it was disconnected, everything worked fine. I reconnected it in its new location. Ran 240V service and a new 18/2 control wire. I connected the control...

Hello! If anybody could help me with this it would be great. I'm looking at buying a festool saw from america which runs on 120v but tools and electrical equipment in austraila run on 240v. Is there anything I can do to make it work and if so is it going to be a hassle??

HI... Do I need for a converter from 240 Volt to 120 Volt... cuse I have some electrical equipement which is working on 240 Volt.. now I want to use this equipment in the countries with 120 Volt... Do I need for converter or NOT?? reply me on the below email address Email...

I am beginning to replace some old 120v outlets when I took off the face plate I found I have 3 white wires and 3 black wires. Do I cap two of each and only attach one black and one white on new outlet on new outlet?

I have a boat which is 240v 50 amp and the marina can only get me two 120v 50 amp circuits to me. Can anyone tell me if I can tie two 120v 50amp circuits into one 240v 50amp circuit. It would be greatly appreciated