Ask Experts Questions for FREE Help !
Ask
    aud man's Avatar
    aud man Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 8, 2007, 12:27 PM
    Zone valve
    Got a white rogers zone valve spinning and not stopping ,has my end switch burned out .
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Dec 8, 2007, 05:39 PM
    You did not state the part number of the valve but if it is the one I am thinking of you will have to replace the power head. There is a special way to do this without opening the system and draining the water. Instructions are in the box with the new valve.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Zone valve problem [ 5 Answers ]

Zone valve for upstairs will not open. Already replaced thermostat. The only time I have heat upstairs is when the valve in manually opened and the downstairs heat kicks on. Any help or advice would be great! Thank you.

Replacing White Rogers Zone Valve Power Head [ 1 Answers ]

I recently replaced the power head on a WR zone valve. The valve is working properly but since the change the heat, although hot, lacks any force coming from the base boards. I lost a small amount of water from the boiler when I replaced the valve and am wondering if I lost too much. If so how...

Valve does not turn on furnace in one zone [ 4 Answers ]

I am having problems with one zone of a two-zone heating system. The thermostat does not function; previously this happened intermittently, and turning on the valve manually while the thermostat was set high enough started the furnace. Now, turning on the valve does not help either; the only way to...

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...


View more questions Search