I have five wires red,white,yellow,blue and green where do I wire them to the
Robershaw 9610 model themostat?
Add your answer here.
Check out some similar questions!
RobertShaw 9420 Thermostat [ 8 Answers ]
My thermostat keep shutting off altogether. No reading or anything. After a day of so, it will click back on by itself. Usually when I've had the controls in the off position rather than cool or heat. Once it comes back to life I can turn the ac on but it normally goes out again within a few...
HoneyWell Themostat wiring [ 3 Answers ]
Hi, Currently I have a Honeywell analog(mercury) thermostat which I'm trying to replace with Honeywell RTH6300B. When I look at the current mercury stat wiring its lot different. I see a red wire connected to unmarked place. I see a yellow wire connected to something marked as "2" and a white wire...
Wiring from robertshaw to honeywell [ 1 Answers ]
Hi! I have central electric heating and a heating pump for heating and cooling I just bought a programmable thermostat (honeywell rth7000) to replace my existing robertshaw. But I have few questions - on my robertshaw I have terminal 24v and 24v(c) I assume that is the samething as R and...
Themostat wiring installation [ 1 Answers ]
I just bought a new themostart to replace with the old one I only have heating and the wiring diagram showing I have to connect one to R and one to W(heating relay) The wire I have from the wall one is red and one is white which I don't know which one should I connect to the R and which one...
View more questions Search