 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring gas valve controller set
I have a wireless gas leaking sensor that I connect with my Home net server and it gives signal while leakage happans. Then I have a gas valve controller set composed of a controller and a gas valve. I connected the controller with Home Net server through Rs-485 cable. Could you please tell me how I make wiring between controller and valve body. The controller output is having 4 wires and valve input is having 2 wires.
|
||||
Check out some similar questions!
Help, I need wiring info for an old ITT general control gas valve on an outdoor swimming pool heater. The valve has 4 terminals, 2 labeled thermostat and 2 for the millivolt generator. I understand the safety devices get wired in series but I am not sure how the on/off switch and thermostat get...
Looking for wiring Schematic for gas furance
The copper pipes are hot, the motor is running, but there isn't heat coming upstairs. I believe the wires to the zone valves are either disconnected or misconnected. It is and MAerican Standard unit that is at least 40 years old. Thank you so much!
So I have older furnaces in my duplex (1247 series gas Hi-boy). Forced air and the heat worked fine until I had my HVAC guy install a/c this summer. He hooked the a/c up fine, even the FAN ON without COOL on works. But when I switch to heat the outside A/C compressors turn on. The pilot light is...
I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
