Ask Experts Questions for FREE Help !
Ask
    MTSec's Avatar
    MTSec Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2014, 06:35 PM
    Why does the red light blink constantly on Coleman 7681-8171/B
    Why does the red light blink constantly on Coleman 7681-8171/B
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Feb 7, 2014, 08:05 PM
    There should be a label on the furnace or possibly printed on the board itself describing the blink codes.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Feb 7, 2014, 08:25 PM
    Some heaters blink 1 slow blink to show the heater is OK.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Map timer coleman 7681 DBA II [ 1 Answers ]

My map tiner switch is in off position should it be on ? And what does it do?

My furnace keeps shutting off. The red light will blink once, pause blink again, pau [ 1 Answers ]

My furnace keeps shutting off. The red light will blink once, pause blink again, pause and so on. The only way to get it to go back on is if I go to the thermostat and slide the notch until I hear a click and turn it back up. I than go back to furnace unplug wire, plug it back in and it kicks...

Red Led Light constantly flashing on my 3Ton Payne Gas Furnace [ 0 Answers ]

Have a 3ton Payne Gas frunace... the Ignitor glows and the Gas Valve opens,the burners turn on,but after about a minute,the flame goes out and the Induced Draft motor shuts off.Only the blower stays running... the red led light keeps flashing... what is wrong? I replaced the ignitor,but the problem...

My furnace has a seven red light blink error indicating that ignition lock out due to [ 2 Answers ]

Red light blinks seven times,ignition lockout due to retries.. does the igniter burn out ? It does not glow as it does in normal operation or is it more technical

The red light has a steady blink no hesitation [ 0 Answers ]

This is freongas again, I just wanted to say that the red light in the unit blinks the same no indication of a code. This is for the carrier 58gs100-2 that pilot lights but no fire and on blower is it the PC board?? Heeeeeeelp!!

View more questions Search