Ask Experts Questions for FREE Help !
Ask
    askblackward's Avatar
    askblackward Posts: 2, Reputation: 1
    New Member
     
    #1

    Feb 21, 2012, 08:58 PM
    Why does my heater work but my a/c and fan do not with my central HVAC?
    All fuses power good, the control board checks L1 and L2 have power(115 volts)door switch is working. Fan will not run in manual position and a/c will not turn on. Older currier unit new control panel and working thermostat fan runs while heater is being used with no problem but fan will not run in the "manual on" position nor will the A/C turn on from thermostat. I had a new thermostat placed with correct wiring and it still will do what was described about so I put old switch back on and still does as described.please help
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    Feb 22, 2012, 07:19 PM
    Has the system ever worked correctly? Sounds like you need to have a hvac tech out to check the system.
    jdublon's Avatar
    jdublon Posts: 10, Reputation: 1
    New Member
     
    #3

    Mar 22, 2012, 05:10 PM
    This look like issue with the main board look if you get any error message on a LED also if you switch to manual see if you have any click coming from the relay on the board am strongly believe that you have to replace the board
    john

    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #4

    Mar 22, 2012, 07:52 PM
    Wow, really? You suggest replacing one of the most expensive components first? That is simply a bad diagnosis. Without being able to really know what is happening with the unit, you should niot suggest such extreme measures.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why does my heater work but my a/c and fan does not with my central hvac? [ 0 Answers ]

All fuses power good, the control board checks L1 and L2 have power(115 volts)door switch is working. Fan will not run in manual position and a/c will not turn on. Older currier unit new control panel and working thermostat fan runs while heater is being used with no problem

HVAC outside unit and fan only work intermittently [ 1 Answers ]

I have Goodman inside and outside unit that's controlled with a 3-zone Honeywell zone controller. For the last three months our AC has been very intermittent and will work fine for 3-7 days and then all of a sudden not work for 3-15 hours before magically working fine again. Often it won't be...

Fan on Central Air doesn't work. [ 2 Answers ]

The fan on my central air unit doesn't run. The condencer kicks on and the blower on the furnace works. Why doesn't the fan work.

Central Heater comes on but fan not coming on to blow heat [ 2 Answers ]

This morning our heater came on at appointed time but the fan never came on even when we switched it from auto to on setting. We have a 8 yr old split system, (2 stories) & its worked fine until today. Is there anyone that can give us a few likely scenarios to try & fix ourselves before we have to...


View more questions Search