Check out some similar questions!
My heat keeps running well after it's met the desired "set" room temperature
[ 19 Answers ]
I have a Lennox electric furnace (heat pump w/ aux heat I believe) that's about 10 years old. The thermostat is a basic Honeywell digitial. The problem at hand is that the furnace only shuts off it you lower the temp setting 2-3 degree's below the room temp. It eventually kicks back on though...
Bryant furnace shutdown before desired temperature
[ 8 Answers ]
My furnace runs for ten minutes blows heat but shuts off before reaching desired temperature thermostat set for 72 and it is 60 degrees in my house. I turn the thermostat Off and then turn it back on and the heat cycles for ten minutes.
Heater runs and then shuts off before desired temperature achieved
[ 9 Answers ]
I recently installed two new programmable thermostats in my house, one for the upstairs unit, one for the downstairs unit. The upstairs functions great. It's a bit different on the first floor... I programmed the unit to keep the heat at 62 during the night and bring it up to 68 at 6am. The...
New Sauna Heater Trips GFI When Desired Temperature is reached
[ 5 Answers ]
I have just installed a new outdoor sauna. The new sauna heater trips the GFI breaker when the thermostat shuts the heater off after reaching the specified temperature. I have a 50 amp GFI breaker in the house 200amp load box. From there I ran #6 wire for 120 feet to an external weather proof... View more questions Search
Add your answer here.
|